Onkyo HT-R590 instruction manual Muting the AV Receiver, Using Headphones, AV Recording

Page 33

Muting the AV Receiver

You can temporarily mute the output of the AV receiver.

1 Press RECEIVER followed by MUTING.

The output is muted and the MUTING indicator flashes on the display.

Tip

To unmute, press MUTING again or adjust the volume.

The mute is cancelled when the AV receiver is set to Standby.

Using Headphones

1 Connect a pair of stereo headphones with a standard plug (1/4 inch or 6.3 mm) to the

PHONES jack.

Note

Always turn down the volume before connecting your headphones.

While the headphones plug is inserted in the PHONES jack, the speakers are turned off.

When you connect a pair of headphones, the listening mode is set to Stereo, unless it’s already set to Stereo, Mono, or Direct.

Recording

This section explains how to record the selected input source to a component with recording capability, and how to record audio and video from different sources.

AV Recording

Audio sources can be recorded to a recorder (e.g., cassette tape deck, CDR, MD recorder). Video sources can be recorded to a video recorder (e.g., VCR, DVD recorder).

1

Use the input selector buttons to select the source

 

that you want to record.

 

You can watch the source while recording. The AV

 

receiver’s MASTER VOLUME control has no effect

 

on recording.

2

On your recorder, start recording.

3

On the source component, start playback.

 

If you select another input source during recording,

that input source will be recorded.

Recording Separate AV Sources

Here you can record audio and video from completely separate sources, allowing you to overdub audio onto your video recordings. This function takes advantage of the fact that when an audio-only input source (TV/CD) is selected, the video input source remains unchanged.

In the following example, audio from the CD player connected to the TV/CD IN and video from the camcorder connected to the AUX INPUT VIDEO are recorded by the VCR connected to the VCR/DVR OUT jacks.

Camcorder

 

CD player

VCR

 

 

: Video signal

 

 

: Audio signal

1

Prepare the camcorder and CD player for

 

playback.

 

2

Prepare the VCR for recording.

3

Press AUX input selector.

 

4

Press TV/CD input selector.

 

 

This selects the CD player as the audio source, but

 

leaves the camcorder as the video source.

5

Start recording on the VCR and start playback on

 

the camcorder and CD player.

The video from the camcorder and the audio from the CD player are recorded by the VCR.

En

33

Image 33
Contents HT-R590 Temperature protection operates if the apparatus Local regulations when disposing of batteriesAttain an abnormal high temperature 10 cm 4 at the rear. The rear edge of the shelf orPrecautions Make sure you have the following accessories Supplied AccessoriesInstalling the batteries Aiming the remote controllerContents Amplifier FeaturesProcessing MiscellaneousFront Panel Front & Rear PanelsFor detailed information, see the pages in parentheses DisplayRear Panel Remote Control jackControlling the AV Receiver Remote ControllerRemote MODE/INPUT Selector buttons 19, 47 to Controlling the tunerConnecting Your Speakers Connecting the AV ReceiverConnecting the Speaker Cables Screw-type speaker terminalsSpeaker Connection Precautions Speaker ConfigurationUsing a Powered Subwoofer Number of channelsConnected image with AV components About AV ConnectionsAV Cables and Jacks Hdmi cableConnecting Components with Hdmi Audio return channel ARC functionJack Components Assignable Connecting Your Components How to record the videoSee Recording to make a connection for video recording Connecting a Recording Component Connecting Onkyo uComponentsSystem On/Auto Power On Remote ControlConnecting the Power Cord Connecting AntennaTurning On/Off the AV Receiver See Auto Standby about a power management settingTurning On Turning OffControlling Contents of USB Devices PlaybackPlaying the Connected Component Understanding Icons on the Display Standard Mode controlPlaying iPod/iPhone via USB ModeUsing the Tuner Extended Mode controlTuning into Radio Stations Playing USB DeviceUsing RDS Asian models Presetting AM/FM StationsDisplaying Radio Text RT Finding Stations by Type PTYListening to Traffic News TP Using the Automatic Speaker Setup Using Basic FunctionsMeasurement procedure CalibrationListening Position a, and connect it to the Setup MIC jack Set the speaker setup microphone at the MainWhen you’ve finished making the settings, press ` CancelChanging the Speaker Setup Manually Error MessagesUsing the Listening Modes Selecting Listening ModesAbout Listening Modes Input Source Following audio formats are supported by the listening modeSpeaker Layout Onkyo-Original DSP Listening ModesListening Modes Listening modes cannot be selected with some source formats Using the Sleep Timer Using the Home MenuUsing the Music Optimizer Setting the Display BrightnessDisplaying Source Information Changing the Input DisplayMuting the AV Receiver Using HeadphonesRecording AV RecordingOn-screen Setup Menus Advanced SetupCommon Procedures in Setup Menu Explanatory NotesHdmi Input Input selector Default assignmentComponent Component Video Input Digital Audio Digital Audio InputFront Sp Config Speaker ConfigurationSurround Back Ch Crossover Crossover FrequencyMultiplex/Mono Settings Audio AdjustSp Distance Speaker Distance Level Cal Level CalibrationDolby Settings DTS SettingTheater-Dimensional Setting Audyssey Source SetupPreset Name For Input Selector SyncAudio Selector Hardware Hdmi Ctrl Rihd Hdmi SetupHdmi Through Audio TV OutUsing the Audio Settings Tone Control SettingsSpeaker Levels Late Night Function Music OptimizerCinemaFILTER Using the Onkyo Dock IPod/iPhone Playback via Onkyo DockControlling Your iPod/iPhone Available buttons Entering Remote Control Codes Preprogrammed Remote Control CodesRemote Control Codes for Onkyo Components Connected via u Controlling Other Onkyo ComponentsResetting the Remote Controller Resetting Remote Mode ButtonsControlling Other Components Controlling a Blu-ray Disc/DVD Player, HD DVD PlayerComponents Buttons DVDplayer Cassettetape deckDisc + Can’t turn on the AV receiver TroubleshootingAV receiver turns off unexpectedly There’s no sound, or it’s very quietSpeaker volume cannot be set as required There’s no sound with a certain signal formatAbout DTS signals Only the front speakers produce soundCan’t access the music files on a USB device Remote controller doesn’t workStandby power consumption Sound changes when I connect my headphonesHow do I change the language of a multiplex source Video Attoff defaultUfunctions don’t work Video AttenuationConnection Tips and Video Signal Path Video Connection FormatsAudio Connection Formats USB Features USB Device RequirementsSupported Audio File Formats About Hdmi Supported Audio FormatsAbout Copyright Protection Using an RIHD-compatible TV, Player, or Recorder About p-compatible componentsOperations that can be performed with Connection Confirm the connecting and setting How to connect and setupConfirm the settings Operate with the remote controllerAmplifier Section SpecificationsVideo Section Tuner SectionOnkyo Europe Electronics GmbH UK Branch Onkyo Europe Electronics GmbH
Related manuals
Manual 60 pages 12.76 Kb

HT-R590 specifications

The Onkyo HT-R590 is a versatile and feature-rich home theater receiver that has garnered attention for its impressive audio performance and user-friendly design. This device serves as the heart of a home entertainment system, delivering a dynamic audio experience that enhances movies, music, and gaming.

One of the standout features of the HT-R590 is its support for high-definition audio formats. The receiver is capable of decoding Dolby TrueHD and DTS-HD Master Audio, making it an excellent choice for those who appreciate high-quality sound in their media. With a powerful output of 100 watts per channel, it can drive even the most demanding speakers, ensuring that soundtracks and effects come to life with clarity and depth.

The HT-R590 also features a variety of connectivity options, including multiple HDMI inputs that support 4K video pass-through. This means that users can connect their Blu-ray players, gaming consoles, and streaming devices without hassle, making it easy to create a comprehensive home theater setup. The receiver also includes legacy connections for older devices, such as composite and component video inputs, providing flexibility for various audio and video sources.

Another notable characteristic of the Onkyo HT-R590 is its incorporation of Audyssey technology. This advanced room correction technology optimizes the sound output based on the specific acoustics of the room. By analyzing the space and adjusting the audio settings accordingly, users can achieve a balanced and immersive sound experience, regardless of room dimensions or speaker placements.

The user interface of the HT-R590 is designed with convenience in mind. A clear and intuitive remote control allows users to navigate settings, adjust audio levels, and switch inputs with ease. Furthermore, the on-screen display simplifies the setup process, guiding users through configuration steps to ensure optimal performance.

In addition to its robust audio capabilities, the Onkyo HT-R590 supports various streaming options through built-in Bluetooth technology. This allows users to easily connect their smartphones and tablets to stream music directly to the receiver, expanding the functionality beyond traditional home theater setups.

In summary, the Onkyo HT-R590 is an excellent choice for anyone looking to elevate their home audio experience. With its high-definition audio support, extensive connectivity options, advanced room correction technology, and user-friendly interface, this receiver stands out as a formidable option in the home theater market, delivering exceptional sound quality and versatility for a wide range of multimedia applications.