Projector features / Preparations
Projector features
This projector has a capability to project various picture signals onto a screen. This projector requires only a minimal amount of space for installation and can produce a large projected image from even a short distance.
This projector boasts a variety of I/O por and low noise. These features provide you with the broad use of this projector.
Preparations
Contents of package
Your projector should come with the items shown below. Contact immediately your dealer if anything is missing.
NOTE • Keep the original packing materials for future reshipment. For moving the projector, be sure to use the original packing materials. Use special caution for the lens part.
Power cord | VGA cable | RCA | |
Video/Audio cable | |||
Projector |
| ||
|
|
Remote control
(with two AA batteries)
Operator's Guide
Product Safety Guide
Quick Start Guide
Warranty and
Warranty Registration
WEEE Statement
| USB cable | RCA |
|
| Component cable |
Lens cover and Strap |
|
|
Lens cover is attached to |
|
|
the projector. | Security Label | Soft case |
Fastening the lens cover
To avoid losing the lens cover, please fasten the
lens cover to the projector using the enclosed strap.
1. Fix the strap to the strap hole of the lens cover.
Thread one end of the strap through the strap hole
of the lens cover and make the loop at the end, and let the other end of the strap through the loop. Not have a knot in the strap at either end.
2. Fix the strap to the strap hole of the projector.
Thread the other end of the strap through the strap hole of the projector and make the loop there. Let the lens cover with the one end of strap though the loop.