3M X66 manual Resolution, Standard Custom

Page 33

INPUT Menu

INPUT Menu (continued)

Item

Description

The resolution for the COMPUTER IN1 and IN2 input signals can be set on this projector.

(1)In INPUT menu select RESOLUTION using the ▲/▼ buttons and press the ► button.

The RESOLUTION menu will be displayed.

RESOLUTION

(2)In the RESOLUTION menu, select the resolution you wish to display using the ▲/▼ buttons.

Selecting AUTO will set a resolution appropriate to the input signal.

(3)STANDARD

Pressing the ► or ENTER button when selecting a STANDARD resolution will automatically adjust the horizontal and vertical positions, clock phase and horizontal size and automatically select an aspect ratio.

(3) CUSTOM

(3)-1 To set a custom resolution use the ▲/▼ buttons to select the CUSTOM and the CUSTOM RESOLUTION box will be displayed. Set the horizontal (HORZ) and vertical (VERT) resolutions using the ▲ /▼/◄/► buttons. Although not all resolutions are guaranteed.

(3)-2 To save the setting place the cursor on the right-most digit and press the ► button.

The horizontal and vertical positions, clock phase and horizontal size will be automatically adjusted and an aspect ratio will be automatically selected.

(3)-3 To revert back to the previous resolution without saving changes place the cursor on the left-most digit and press the ◄ button. The screen will then return to the RESOLUTION menu displaying the previous resolution.

STANDARD

↓

CUSTOM

↓

•For some pictures, this function may not work well.

33

Image 33

Contents About this manual Thank you for purchasing this projectorTrademark acknowledgment Content Fastening the lens cover Contents of packagePart names ProjectorHOT Control panel Rear panelComponent Remote control Setting up ArrangementOn a horizontal surface Suspended from the ceiling Arrangement Setting up Monitor Connecting your devicesSpeakers VCR/DVD playerAbout Plug-and-Play capability Connecting your devicesUsing the security bar and slot Connecting power supplyRemote control About the remote control signalPutting batteries Using as a simple PC mouse & keyboard Changing the frequency of remote control signalMouse right button Press Reset button Mouse left button Press Enter buttonPower on/off Turning on the powerTurning off the power Selecting an input signal Adjusting the volumeOperating Temporarily muting the soundSelecting an input signal Searching an input signal For a computer signal  For no signalAdjusting the zoom and focus Adjusting the projectors elevatorAdjusting the position Using the automatic adjustment featureAuto PositionCorrecting the keystone distortions Using the magnify featureKeystone Magnify ON/OFFTemporarily blanking the screen Freezing the screenFreeze BlankEasy Menu Using the menu functionAdvanced Menu Using the menu functionAspect Picture ModeAuto KeystoneEasy Menu Picture Menu GammaColor Temp LOAD-1, LOAD-2, LOAD-3, LOAD-4 Picture MenuMY Memory SAVE-1, SAVE-2, SAVE-3, SAVE-4For adjusting Gamma To adjust Custom function in Gamma and Color TempFor adjusting Color Temp Gamma Color TempFor no signal For a computer signalImage Menu Over ScanAuto Adjust PhaseImage Menu SizeProgressive Input MenuVideo NR Color SpaceVideo Format Input MenuFrame Lock ComputerStandard ResolutionCustom Standard CustomSetup Menu Volume Setup MenuSpeaker AudioBlank Screen MenuStart UP Screen MenuCapturing error has occurred. Please try again MyScreenMyScreen registration is finished No Input is Detected Sync is OUT of RangeMessage Option Menu Auto SearchAuto on Option Menu Auto OFFLamp Time Service MY ButtonFAN Speed Filter Message GhostKEY Lock Factory ResetRemote Freq InformationInputting the Password Using Security FeaturesChanging the Password SecurityIf you have forgotten your Password Using the MyScreen Password FunctionTurning on the MyScreen Password Function Setting the PasswordUsing the PIN Lock Function Turning the Password offRegistering the PIN Code Description Security Turning Off the PIN Lock FunctionIf you have forgotten your PIN Code Using the Transition Detector Function Setting the Transition Detector PasswordTurning On the Transition Detector Function Setting the Transition Detector off Maintenance LampType number Replacing the lamp Lamp Lamp warningCleaning the air filter Air filterType number Page There is no input signal TroubleshootingInternal temperature is rising Related messagesRegarding the indicator lamps Shutting the projector down Resetting all settingsSignal cables are not correctly connected Electrical power cord is not pluggedSignal source does not correctly work Input changeover settings are mismatchedColor Space setting is not suitable Color settings are not correctly adjustedNot properly adjusted Play monitorSpecifications SpecificationSpecification SpecificationsIntended Use

Related manuals

Manual 2 pages 52.39 Kb