3M X66 manual MY Button, Service, FAN Speed

OPTION Menu

OPTION Menu (continued)

Item

Description

This item is to assign one of the following functions to MY BUTTON 1 and 2 on the remote control (6).

Choose 1 or 2 on the MY BUTTON menu using the ◄/► button first. Then using the ▲/▼ buttons sets one of the following functions to the chosen button.

• COMPUTER1: Sets port to COMPUTER IN1.
• COMPUTER2: Sets port to COMPUTER IN2.
• COMPONENT: Sets port to COMPONENT(Y, Cb/Pb, Cr/Pr)
• S-VIDEO: Sets port to S-VIDEO.
• VIDEO: Sets port to VIDEO.
• INFORMATION: Displays a dialog of INPUT INFORMATION (44).
• AUTO KEYSTONE EXECUTE:
Performs automatic keystone distortion correction (34).
• MY MEMORY:
Loads one of adjustment data stored (27).
MY BUTTON	When no data is saved
When the current adjustment
is not saved to memory a	in memory, a dialog is
dialog is displayed.	displayed.

If you want to keep the current adjustment, please press the ◄ button to quit. Otherwise the current adjusted condition will be lost by loading a data.

•PICTURE MODE: Changes the PICTURE MODE (24).

•FILTER RESET:

Displays the filter time reset confirmation dialogue (41).

•VOLUME+: Set the volume up.

•VOLUME-: Set the volume down.

Selecting this item displays the SERVICE menu.

Select an item using the ▲/▼ buttons, and press the ► button or the ENTER button to execute the item.

FAN SPEED AUTO ADJUST  GHOST  FILTER MESSAGE  KEY LOCK

SERVICE

FACTORY RESET  I NFORMATION  REMOTE FREQ.

FAN SPEED

Using the ▲/▼ buttons switches the rotation speed of the cooling fans. The HIGH is the mode for use at highlands etc. Note that the projector is noisier when the HIGH is selected.

HIGH ó NORMAL

(continued on next page)

42