3M X66 manual Description Security, Turning Off the PIN Lock Function

Page 48

OPTION Menu

OPTION Menu (continued)

Item

Description

SECURITY (continued)

3.1-2 Use the ▲/▼ buttons on the PIN LOCK on/off menu to select TURN ON and the PIN BOX will be displayed.

3.1-3 Input a 4 part PIN Code using the ▲, ▼, ◄, ►, COMPUTER and INPUT buttons.

A PIN Code again box will appear. Reenter the same PIN Code. This will complete the PIN Code registration.

•If there is no key input for about 55 seconds while the PIN BOX or the PIN Code again box are displayed the menu will close. If necessary repeat the process from 3.1-1.

Afterwards, anytime the projector is restarted after AC power is turned off the PIN BOX will be displayed. Enter the registered PIN Code.

The projector can be used after entering the registered PIN Code. If an incorrect PIN Code is input the PIN BOX will be displayed again.

If an incorrect PIN Code is input 3 times the projector will turn off. Afterwards the projector will turn off every time an incorrect PIN Code is input. The projector will also turn off if there is no key input for about 5 minutes while the PIN BOX is displayed.

This function will activate only when the projector is started after AC power is turned off.

•Please do not forget your PIN Code.

3.2 Turning Off the PIN LOCK Function

3.2-1 Follow the procedure in 3.1-1 to display the PIN LOCK on/off menu. Use the ▲/▼ buttons to select TURN OFF and the PIN BOX will be displayed.

Enter the registered PIN Code to turn the PIN LOCK function off. If an incorrect PASSWORD is entered the menu will close.

3.3 If you have forgotten your PIN Code

3.3-1 While the PIN BOX is displayed, press and hold the RESET button for 3 seconds or press and hold the INPUT and ► buttons for 3 seconds. The 10-digit Inquiring Code will be displayed.

•If it passes for about 5 minutes after the PIN BOX is displayed the projector will turn off.

3.3-2 Contact your dealer with the 10-digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed.

(continued on next page)

48

Image 48

Contents About this manual Thank you for purchasing this projectorTrademark acknowledgment Content Contents of package Fastening the lens coverPart names ProjectorHOT Control panel Rear panelComponent Remote control Setting up ArrangementOn a horizontal surface Suspended from the ceiling Arrangement Setting up Connecting your devices MonitorSpeakers VCR/DVD playerConnecting your devices About Plug-and-Play capabilityConnecting power supply Using the security bar and slotRemote control About the remote control signalPutting batteries Changing the frequency of remote control signal Using as a simple PC mouse & keyboardMouse right button Press Reset button Mouse left button Press Enter buttonPower on/off Turning on the powerTurning off the power Adjusting the volume Selecting an input signalOperating Temporarily muting the soundSearching an input signal Selecting an input signal For a computer signal  For no signalAdjusting the projectors elevator Adjusting the zoom and focusUsing the automatic adjustment feature Adjusting the positionAuto PositionUsing the magnify feature Correcting the keystone distortionsKeystone Magnify ON/OFFFreezing the screen Temporarily blanking the screenFreeze BlankUsing the menu function Easy MenuUsing the menu function Advanced MenuPicture Mode AspectAuto KeystoneEasy Menu Picture Menu GammaColor Temp Picture Menu LOAD-1, LOAD-2, LOAD-3, LOAD-4MY Memory SAVE-1, SAVE-2, SAVE-3, SAVE-4To adjust Custom function in Gamma and Color Temp For adjusting GammaFor adjusting Color Temp Gamma Color TempFor a computer signal For no signalImage Menu Over ScanPhase Auto AdjustImage Menu SizeInput Menu ProgressiveVideo NR Color SpaceInput Menu Video FormatFrame Lock ComputerResolution StandardCustom Standard CustomSetup Menu Setup Menu VolumeSpeaker AudioScreen Menu BlankScreen Menu Start UPCapturing error has occurred. Please try again MyScreenMyScreen registration is finished No Input is Detected Sync is OUT of RangeMessage Option Menu Auto SearchAuto on Option Menu Auto OFFLamp Time Service MY ButtonFAN Speed Ghost Filter MessageFactory Reset KEY LockRemote Freq InformationUsing Security Features Inputting the PasswordChanging the Password SecurityUsing the MyScreen Password Function If you have forgotten your PasswordTurning on the MyScreen Password Function Setting the PasswordUsing the PIN Lock Function Turning the Password offRegistering the PIN Code Description Security Turning Off the PIN Lock FunctionIf you have forgotten your PIN Code Using the Transition Detector Function Setting the Transition Detector PasswordTurning On the Transition Detector Function Setting the Transition Detector off Maintenance LampType number Replacing the lamp Lamp warning LampCleaning the air filter Air filterType number Page Troubleshooting There is no input signalInternal temperature is rising Related messagesRegarding the indicator lamps Resetting all settings Shutting the projector downElectrical power cord is not plugged Signal cables are not correctly connectedSignal source does not correctly work Input changeover settings are mismatchedColor settings are not correctly adjusted Color Space setting is not suitableNot properly adjusted Play monitorSpecifications SpecificationSpecification Specifications Intended Use

Related manuals

Manual 2 pages 52.39 Kb