LG Electronics HCS6320 setup guide STB Update is not scheduled, STB Update is in progress

Configuration Options via Command Line (Cont.)

Read STB Update Parameters

At the [Satellite (#)] Command > prompt, type getupd and press Enter to display the current STB update status, for example:

STB Update is scheduled to begin in 12 hours 0 minutes with duration 25 minutes

or

STB Update is not scheduled.

or

STB Update is in progress.

It will end in 1 minutes (total duration 25 minutes).

Set STB Update Parameters

1. At the [Satellite (#)] Command > prompt, type setupd and press Enter.

2. At the Change STB Update setting (y/n)? prompt, either:

•Type y and press Enter to modify the current STB software update parameters.

•Type n and press Enter to return to the Satellite Receiver Menu without modifying the STB software update parameters.

3.At the Enable updates (y/n)? prompt, either:

•Type y and press Enter to enable and configure STB software update parameters. The system will initiate a series of prompts that enable you to specify the maintenance window for the update. Continue with step 4.

•Type n and press Enter to disable the STB software update. Then, press Enter again to return to the Command > prompt.

4.At each of the following prompts, type the number of hours and minutes to delay before the STB software update is initiated, as well as the desired duration (in minutes) for the update window. Note that all three of these fields require numerical values. Press Enter after each entry.

If applicable, you can also press Enter at each prompt to accept the default value in square brackets.

Enter the number of hours to delay before starting [12] Enter the number of minutes to delay before starting [0] Enter the maintenance window duration in minutes [25]

Note: The system will not allow a maintenance window that is less than 10 minutes or over four hours. The default value (25 minutes) is the minimum time span typically recommended for an update. It is also recommended that you schedule a maintenance window during a time when the STB is not likely to be in use.

(Continued on next page)

46 206-4183