Mitsubishi Electronics XL30 XL25 SL25 user manual Basic connections, Projector + AV device

Basic connections

This projector can be connected with various devices such as a VCR, video camera, videodisc player, and personal computer that have analog RGB output connectors.

Important:

•Make sure that the connected device is turned off before starting connection.

•Plug in the projector and the connected devices firmly, and unplug them by holding and pulling out their power plugs, not by pulling the power cords.

•When the projector and the connected devices are located too close to each other, the projected image may be affected by their interference.

•See the owner’s guide of each device for details about their connections.

Projector + AV device

Important:

•Connect the video and audio plugs of the AV cable to the proper terminals matching their colors respectively.

•The S-video signal takes priority over the video signal. When you input both the S-video signal and the normal video signal at the same time, the normal video signal is ignored.

•When the connected AV device uses a BNC connector for its video output, connect it to the VIDEO IN2 (BNC) terminal. When both the VIDEO IN2 (BNC) terminal and the VIDEO IN2 (RCA) terminal are engaged at the same time, the image supplied to the VIDEO IN2 (RCA) terminal takes priority.

Connect either one of these.

VCR, etc.

	To audio output
To audio input	To video output
To video input	To S-video output
To S-video input

Projector + DVD player or HDTV decoder

Some DVD players have an output connector for 3-line fitting (Y, CB, CR). When connecting such a DVD player with this projector, use the COMPUTER/COMPONENT VIDEO 2 IN terminal.

DVD player or HDTV decoder

	AUDIO cable
CB(PB) Y CR(PR)	to AUDIO OUT

BNC - RCA connector (option)

B G R

BNC-BNC cable (option)

R/PR

G/Y

B/PB

To COMPUTER AUDIO IN

•The terminals’ names Y, PB, and PR are examples of a case where a HDTV decoder is connected.

•The terminals’ names are different depending on the connected devices.

•Use BNC-BNC cables for connection.

•The image may not be projected correctly with some DVD players.

•When connecting a HDTV decoder having RGB output terminals, set the COMPUTER INPUT to RGB in the SIGNAL menu.

EN – 10