Mitsubishi Electronics XL30 XL25 SL25 When using the projector in Europe, Compliance Notice

Page 2

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the litera- ture accompanying the appliance.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

NOTE:

SINCE THIS PROJECTOR IS PLUGGABLE EQUIPMENT, THE SOCKET-OUTLET SHALL BE IN- STALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE.

WARNING

Use the attached specified power supply cord. If you use another power-supply cord, it may cause interfer- ence with radio and television reception.

Use the attached RGB cable, RS-232C cable with this equipment so as to keep interference within the limit of a FCC Class B device.

This apparatus must be grounded.

DO NOT LOOK DIRECTLY INTO THE LENS WHEN PROJECTOR IS IN THE POWER ON MODE.

When using the projector in Europe

COMPLIANCE NOTICE

This LCD - Video Projector complies with the re- quirements of the EC Directive 89/336/EEC “EMC Directive” as amended by Directive 93/68/EEC and 73/23/EEC “Low Voltage Directive” as amended by Directive 93/68/EEC.

The electro-magnetic susceptibility has been chosen at a level that gains proper operation in residential areas, on business and light industrial premises and on small-scale enterprises, inside as well as outside of the buildings. All places of operation are characterised by their connection to the public low voltage power supply system.

WARNING

Use the attached RGB cable or RS-232C cable with this equipment so as to keep interference within the limits of a EN55022 Class B. Use the shielded D- SUB/5 BNC cable with this equipment so as to keep interference within the limits of a EN55022 Class B. Please follow WARNINGS instructions.

EN – 2

Image 2
Contents 3 0 X L 2 5 S L 2 When using the projector in Europe Compliance NoticeContents Important safeguards Compliance Notice of Industry Canada Overview Control panel Rear panelBottom side Remote control About the laser beamOperation area for wireless control system Using the remote controlBattery installation Using the wired remote controlScreen InstallationOrientation of the projector Projector + DVD player or Hdtv decoder Basic connectionsProjector + AV device Projector + Computer For the computer with a Mini D-SUB 15P connectorsFor using the COMPUTER/COMPONENT Video in 2 BNC terminals For MacintoshGetting ready for projection Adjusting the angle of projectionPreparing the projector for operation To operate projector power on Lamp PowerHow to use the installed functions Volume from the speakerAnamorphic mode Turning off the projectorMenu operation Basic operationImage may be displayed solid white. Adjust the sensitivity Greatly, select 3.When you select OFF, RIS won’t operateWhen the sensitivity is adjusted in a large amount, Depending on the operating environment and imges to beFeature Adjusting the image Picture adjustmentUser memory for signal setting Color matrixColor temperature Adjustment from personal computerPicture in Picture PinP Advanced features for presentationExpand StillProjector + computer with PS/2 connector Mouse remote controlProjector + computer with USB connector OperationHow to reset the operation time meter Lamp replacementInterval of the lamp replacement Cleaning the projector and the ventilation slots MaintenanceCleaning the air-filter Cleaning the lensTroubleshooting Problems Cause Possible SolutionsAbnormal condition IndicatorsNormal condition Specifications Replacement part Option / Not included in the box ConnectorsDimensional drawings What’s included in the boxSpecifications 59.94 800 x TV50 PC-controllable functions Control command diagramInterface ConnectionControl sequence Operation commandsHow to set the grade Remote commands Reading command diagramWhen sRGB is ON, only the main data are effective How to set the grade