Projector + Computer
For the computer with a Mini D-SUB 15P connectors
RGB cable for PC
ENGLISH
To PC audio output
To monitor port
To COMPUTER AUDIO IN
To COMPUTER IN
(Mini
Computer
AUDIO OUT
MONITOR OUTPUT
To MONITOR OUT
RGB cable for PC (option)
When outputting to both the compute's monitor and the projector.
For using the COMPUTER/COMPONENT VIDEO IN 2 (BNC) terminals
|
| to COMPUTER AUDIO IN |
| computer |
|
|
| R/PR |
to PC audio |
| G/Y |
output |
| B/PB |
|
| |
MONITOR OUTPUT |
| H/HV |
|
| |
| to monitor | V |
AUDIO OUT | Mini | |
| port | conversion cable (optional) |
Important:
•When you use a longer RGB cable instead of the provided cable, the picture quality may deteriorate.
•Some computers may require additional connectors or analog RGB output adapters to be connected with this projector. Contact your dealer for further information.
•This projector uses a stereo pin jack for its audio input. Check the type of the audio output terminal of the connected computer and prepare a proper cable for connection. Some computers may not have the audio output terminal.
For Macintosh
•If your Macintosh has no video port, a monitor output adapter is required. Contact your dealer for further information.
•Some Macintoshes may require a MAC adapter for the RGB cable for connection with this projector. Contact your dealer for further information.
About DDC™
The COMPUTER/COMPONENT VIDEO IN 1 terminal of this projector complies with the DDC1/2B standard. When a computer supporting this standard is connected to this terminal, the computer will automatically load the information from this projector and prepare for output of appropriate images.
•After connecting a computer supporting this standard to this terminal, turn on the projector’s main power switch first, and then boot up the computer.
•You may need to install the DDC driver, depending on the computer you use. In this case, you need to download the driver from our Web site. Contact your dealer or Mitsubishi sales office for further information.
EN – 11