Nokia CC100 manual Swtagvlan, Tftp, Time, Upep, Upmaster, Upsys, Useradd, Userdel, Users

		CC100 Master Bridge User’s Guide
	[-c<lan1/lan2/off/del>]	addresses can be setup, refer Static MAC
		<mac>: max 8 entries
		<lan1/lan2>: bind the current MAC entry to LAN1 or LAN2 port,
		i.e. enable this MAC entry as static MAC
		<off>:disable this MAC entry, neither bind to LAN1 nor LAN2
		<del>: remove the current MAC entry, invalid this MAC entry to
		default 00-00-00-00-00-00
	[-c<on/off>]	Display or set up the LAN1/LAN2/HCNA Tag VLAN. refer Tag
	[-p<lan1/lan2/hpna>	VLAN Setup for more.
	[-r<priority(0~7)>]	<lan1/lan2/hpna>: configure LAN1 or LAN2 or HCNA port
	[-v<vid(0~4095)>]	<priority>: 802.1p value, 0~7
	[-i<all/tag>]	<vid>: 802.1Q VID, 0~4096
	[-o<untag/	<all/tag>: ingress rule -- accept all incoming packets or accept
	tag/	incoming tagged packets only, reject other incoming packets.
swtagvlan	bypass >]]	<untag/tag/bypass>: egress rule: un-tag or tag or bypass the
		outgoing packet
		-c: enable Tag VLAN mode or not
		-p: the port in Tag VLAN mode
		-r: 802.1p in Tag VLAN mode
		-v: VID of 802.1Q in Tag VLAN mode
		-I: ingress rule for the port in Tag VLAN mode
		-o: egress rule for the port in Tag VLAN mod
	-s<ip>	Run TFTP client to get file (upload file onto CC100) or to put
tftp	-c<get/put>	file (retrieve file from CC100) from TFTP server IP <ip>.
	-f<file>	<get/put>: run TFTP command ‘get’ or ‘put’
		<file>: filename
time		Display current System Time.
	[-a]	Upgrade EP HCNA driver (stored in Upload Area), this
	[-m<mac>]	operation also synchronize EP with EP Properties Profile
upep	[-n<note>]	stored in CC100,
		-a: upgrade all on-line EP at once
		-m: upgrade the EP with matched MAC <mac>
		-n: upgrade (matched MAC <mac>) EP ‘Note’ property <note>
		Upgrade Master HCNA driver (stored in Upload Area), this
upmaster		operation also synchronize Master HCNA device with its setting
		values in Properties Profile.
upsys		Upgrade the uploaded system firmware (stored in Upload
		Area), then reboot.
	name	Create new management user account.
	-p<password>	name: user name
useradd	-r<ro/rw>	-p: login password
		-r: ‘ro’ for user has read-only privilege, ‘rw’ for user has read-
		write privilege
userdel	name	Delete the management user account by name.
		name: user name
users		Display all user accounts.

45