Nokia CC100 Help, Hpnareboot, Ipconfig, Logserver, Master, Passwd, Ping, Reboot, Rmep, Service

CC100Master Bridge User’s Guide

help		Display all commands with brief description
hpnareboot		Reset Master HCNA device’
	[-a<ip>	Display or set up system IP network, include IP address <ip>,
ipconfig	-m<mask>	subnet mask <mask>, and default gateway <default gateway>.
	-g<default gateway>]
	[-s<set>	Display or set up Unix-like Syslog servers(max 5 set)
	[-c<act/deact>]	<set>: server index, at most 5 servers (0~4)
logserver	[-a<ip>	<act/deact>: activate or de-activate the server with IP address
	-v<severity>] ]	<ip>
		<severity>: select the severity level, refer section “System Log”,
		default level 6 (info)
	-k<on/off/key(0x…)>	Set up Master HCNA device Privacy Mode setting values. Use
		command ‘upmaster’ to take effect on Master device. (replace
		the working values with the setting ones) Use command ‘upep’
master		to upgrade EP with the new ‘Privacy Mode/Key’.
		<on/off>: set ‘Privacy Mode’ to ON or OFF, default OFF
		<key(0xnnnn)>, n is 0~F: 4-digit ‘Privacy Key’ in hexadecimal,
		default 0x0
	[name]	Change user’s password, user can update its own password.
	-o<oldpasswd>	Only superuser has the privilege to rewrite other’s password,
	-n<newpasswd>	[name]: user’s account name, default to current login name if
passwd		not supplied
		<oldpasswd>: old password, superuser can bypass this
		parameter
		<newpasswd>: new password
	[-n<count>]	ICMP ping function,
	[-w<timeout>]	<count>: number of ping requests(max 65535)
ping	[-l<pktlen>]	<timeout>: expiry timer in each reply(1~60 sec)
	address	<pktlen>: sent packet length(64~1500)
		address: target IP address
reboot		Reboot system
rmep	<mac>	Remove designated EP Properties Profile.
		<mac>: EP MAC <mac> to be removed
	[-s<telnet/http>	Display or set up Telnet and Http service.
	[-c<on/off>]	<telnet/http>: configure Telnet or Http
service	[-p<port)>]	<on/off>: enable or disable this service
	[-t<idle>] ]	<port>: TCP port number (0~65535)
		<idle>: expiry timer to logoff automatically (0~32767 sec)
		default 300 seconds
	[-f]	Display EP connection status and properties, and check if it
	[-n<note>]	matches the stored Properties Profile in CC100.
showep	[-m<mac>]	-f: force to re-scan all connected EPs
		-n: display EP with matched <note>
		-m: display EP with MAC address <mac>
showlog		Display the (Syslog) logged messages.
showmaster		Display Master HCNA information, include driver version,
		properties(Privacy Mode, Privacy Key)
	[-c<act/deact>]	Display or set up basic SNMP system configuration.
	[-p<port>]	<act/deact>: activate(enable) or de-activate(disable) SNMP
	[-n<name>]	agent
	[-t<contact>]	<port>: SNMP UDP port number (0~65535), default 161
snmp	[-l<location>]	<name>: SNMP system name
	[-r<rcomm>]	<contact>: SNMP system contact information
	[-w<wcomm>]	<location>: SNMP system location information
		<rcomm>: SNMP system read-only community name, default
		‘public’
		42