Optoma Technology HDBV3090, HDBV3100 Installation of the Master Outer Frame into the Wall Opening

Installation Guide

HDBV3100, HDBV3090, HDBV3080

Installation of the Master Outer Frame into the Wall Opening

Step 1:

With a minimum of two people, carefully raise the master outer frame from the smooth surface while supporting the frame on the left and right side.

IMPORTANT! Exercise caution when raising the frame.

Step 2:

Position the frame in the wall opening.

Step 3:

Make certain that the frame is positioned, squared and flushed in the wall opening.

Step 4:

Insert the twenty-six #8 x 2" dry wall screws through the holes in the frame and the 2" x 4" wood stud behind the wall. IMPORTANT! Make certain the frame is flush and square, using plumb lines and carpenters square.

If the frame is not square, the image from projector will not align correctly.

THIS IS THE MOST CRUCIAL PART OF THE INSTALLATION!

See Figure 1-6: Installation of the Master Frame into the Wall Opening

For more information, please visit our website at:	Installation Guide
http://www.optomausa.com/BigVizion

17