Optoma Technology HDBV3100, HDBV3080, HDBV3090 manual Installation of the Screen Frame

Installation Guide

HDBV3100, HDBV3090, HDBV3080

7. Installation of the Screen Frame

Step 1:

Locate box 3 that the mirror was removed from. (Refer back to the master crate.)

Step 2:

Remove the two side panels that attach box 3 to the bottom of the crate. (Necessary to access box 4)

Step 3:

On the left and right side panel, only remove the screws with red washers that secures box 3 to the master crate.

Step 4:

Carefully remove box 3 from the crate and set it aside; it is no longer needed.

Step 5:

Remove the lid on box 4 by removing all the screws with red washers.

(Referring to Figure 2-3: The Unpacking Diagram.)

Step 6:

Box 4 contains both the screen frame assembly and the wood bezel.

Step 7:

Carefully separate the screen frame assembly from the bezel and move it towards the front of the master outer frame.

Step 8:

Carefully unwrap the protective paper around the screen frame.

For more information, please visit our website at:	Installation Guide
http://www.optomausa.com/BigVizion

30