Hardware Description and Installation
7. Close the “Network and Internet Connections” window.
In Windows XP:
1.From the Start menu select Control Panel and
2.
3.Click the Properties button.
4.Select the Internet Protocol (TCP/IP) and click the Properties button.
5.Make sure that “Obtain an IP address automatically” is selected. If not, select it and click OK.
6.Click Close in the “Local Area Connection Properties” and “Local Area Connection Status” dialog boxes.
7.Close the “Network and Internet Connections” window.
2.5.2Use Static IP Addresses
If your ISP/service provider has provided you with IP settings (for instance IP address, subnet mask and default gateway) and/or explicitly stated that DHCP is not used, you should do the following:
In Windows 98/98SE and Me:
1.From the Start menu select Settings > Control Panel and double- click on the Network icon.
2.Click the Configuration tab and select TCP/IP for the network adapter (wireless, Ethernet or USB) that is connected to your HN294d. Click the Properties button.
3.Select the IP Address tab.
4.Select “Specify an IP address” and enter the IP settings provided by your ISP/service provider. Click OK.
5.Click OK in the “Network” dialog box and close the Control Panel.
EN/LZT 108 6377 R4 - September 2003 | 15 |