Advanced Configuration
9.6.2.1IP Address
On the Configuration > LAN > IP Address page you can define the IP addresses over the LAN interface on which you can access the HN294d.
The table below describes the parameters:
|
|
|
|
|
| Parameter |
| Description |
|
|
|
|
|
|
|
|
|
|
|
| Primary IP Address |
| The Primary IP address is used for the purpose of |
|
|
|
| system management. When it is assigned, a PC on |
|
|
|
| the LAN is able to use the specified address to |
|
|
|
| access the HN294d through Ethernet. |
|
|
|
| By default, the IP address and subnet mask are |
|
|
|
| 192.168.0.1 and 255.255.255.0 respectively. This |
|
|
|
| gives that you have an available range of IP |
|
|
|
| addresses from 192.168.0.2 to 192.168.0.254 that |
|
|
|
| can be assigned to PCs on the LAN. |
|
|
|
|
|
|
|
|
|
|
|
| Secondary IP Address |
| If you have several IP address ranges you can apply |
|
|
|
| a secondary IP address on which LAN computers |
|
|
|
| also can access the HN294d. This is a convenient |
|
|
|
| way to access the HN294d if you have two different |
|
|
|
| subnets. |
|
|
|
|
|
|
|
|
|
|
|
Enter your IP settings and click the Apply button.
Select System > Save Configuration and click the Save button to save you new settings.
EN/LZT 108 6377 R4 - September 2003 | 47 |