Garmin HN294DP/DI manual Description of parameters when creating a new filtering rule, Parameter

Advanced Configuration

6.Enter parameters according to the descriptions below and click the Apply button.

7.Select System > Save Configuration and click the Save button to save your new settings.

Description of parameters when creating a new filtering rule:

Parameter	Description
Protocol Type	It governs the information flow within a
	communications infrastructure. You may select the
	protocol from the drop-down list and then enter the
	port number that identifies the service, e.g. web
	service is on port 80 and FTP on port 21.
Local Side	If you wish to filter packets originating from a certain
IP Address and Netmask	node, enter the IP address and subnet mask that
	identifies this node on the network.
Remote Side	If you wish to filter packets addressed to a certain
IP Address and Netmask	node, enter the IP address and subnet mask that
	identifies that destination node on the Internet. The
	Netmask field is disregarded if you leave it as
	0.0.0.0.

68 EN/LZT 108 6377 R4 - September 2003