S e t t i n g | u p | t h e | P r o j e c t o r |
|
|
|
|
NOTE: The USB mouse is supported for use with Windows 98 only.
NOTE: You do not need to restart your computer after connecting a USB mouse to use it (it is hot- pluggable). You must restart your computer after plugging in a
Do you want to control the computer’s mouse from the projector’s remote or keypad?
If your computer has a PS/2 connector, use the PS/2 mouse cable.
1Plug the end of the PS/2 mouse cable with 6 pins into the mouse connector on your computer.
2Plug the end of the PS/2 mouse cable with 9 pins into the 
connector on the projector.
If your computer has a USB connector and is running Windows 98, use the USB mouse cable.
1Plug the 
end of the USB mouse cable into the mouse connector on your computer.
2Plug the 
end of the USB mouse cable into the 
connector on the projector.
You must have the appropriate USB drivers installed on your computer to use the USB feature. Windows 98 ships with the appropriate drivers.
Now you’re ready to power up the projector and your laptop. Skip to “Powering up the Projector and Adjusting the Image” on page 11.
8