InFocus 330 manual Status Menu

Page 37

U s i n g	t h e	P r o j e c t o r

Status Menu

This is a read-only window for informational purposes. To dis- play the status window, select Show status from the menu, then click the left or right navigation button. To remove the window, click the left or right navigation button.

		FIGURE 18
		Status menu
		Lamp hours used
		Indicates how many hours the current lamp has been in use. The
		counter starts at zero hours and counts each hour the lamp is in
		use. Change the bulb when the brightness is no longer accept-
		able. See “Replacing the Projection Lamp” on page 27 for details.
		Computer resolution
		Shows your computer’s resolution setting. To change this, go to
		your computer’s Control Panel and adjust the resolution in the
		Display tab. See your computer’s user’s guide for details.
		Horizontal refresh rate
		The time period that one horizontal line is displayed.
		Vertical refresh rate
		The time period that one video frame is displayed.
		Mute status
		Indicates if the audio is muted.
		Software version
		Indicates the projector’s software version. This information is
		useful when contacting Technical Support.
	26	Source
	26	Indicates the active source, Computer or Video.
		Indicates the active source, Computer or Video.

Image 37

Contents I D E Page Safety Certifications Declaration of Conformity Table of Contents Index AppendixSafety Instructions F e t y S t r u c t i o n s T R O D U C T I O N Introduction Image ResolutionCompatibility Unpacking the ProjectorT r o d u c t i o n Usage Guidelines If You Need Assistance WarrantySetting UP Projector Setting UP the Projector T t i n g O j e c t o r Connecting a Computer T t i n g O j e c t o r Audio Adapter Composite video cable Audio cable Connecting a Video PlayerCable Powering up the Projector and Adjusting the Image Turning Off the Projector Using Projector Basic Image Adjustment Using the ProjectorUsing the Remote Control I n g O j e c t o r Adjusting the Projector Using the Keypad and Remote Buttons Standby Using the On-Screen Menus Display Menu Audio Menu Image Menu I n g O j e c t o r Position and Vert. Position Controls Menu Rear Projection Language Menu Status Menu I N T E N a N C E Troubleshooting Cleaning the Lens Maintenance & TroubleshootingReplacing the Projection Lamp Pull the lamp door up and remove it Lift and grasp the pull tab and lift the module out Figure Using the Kensington Lock Replacing the Batteries in the Remote ControlProblem Color or text not being projected Troubleshooting Problem Nothing on projection screenProblem The screen resolution is not right Problem Image isn’t centered on the screenProblem Image is too wide or narrow for screen Problem Image and menus are reversed left to right Problem Image is out of focusProblem no sound Problem Image is noisy or streakedProblem Lamp shuts off Problem Lamp seems to be getting dimmerP E N D I Appendix SpecificationsStandard Accessories Ship with the projector Part Number AccessoriesOptional Accessories Key command to Computer Activate port De-activate port Portable and Laptop Activation ChartFN-F6 FN-F4 FN-F1 NCR Wyse Software driven Zenith FN-F10 Using Video Mirroring with a PowerBook Computer Feet Projected Image SizeD E Index D e Page Page Limited Warranty Part Number