InFocus 330 manual Safety Instructions

Page 7

SAFETY INSTRUCTIONS

Please read and follow all safety instructions provided BEFORE using your new projector. Failure to comply with safety instruc- tions may result in fire, electrical shock, or personal injury and may damage or impair protection provided by equipment. Please save all safety instructions.

Safety Definitions:

•Warning: Statements identify conditions or practices that could result in personal injury.

•Caution: Statements identify conditions or practices that could result in damage to your equipment.

Safety Symbols:

Attention: For information about usage of a feature, please refer to the User’s Guide.

Warning: Hot surface. Do not touch.

An arrow pointing to the lamp door on the projector.

Safety Terms:

•Warning: Don’t look directly into the lens when the lamp is turned on.

•Warning: To replace the lamp, turn the projector off by unplugging the power cord. To avoid burns, wait 30

minutes before opening the lamp door. Follow all instructions provided in this User’s Guide.

•Warning: Please use the power cord provided. Connect the power cord to a receptacle with a protective safety

(earth) ground terminal.

•Warning: Refer all service to qualified service personnel. Ser- vicing your own projector will void the warranty. See the fol- lowing page for the customer service contact information.

•Caution: Don’t block ventilation openings.

iii

Image 7

Contents I D E Page Safety Certifications Declaration of Conformity Table of Contents Index AppendixSafety Instructions F e t y S t r u c t i o n s T R O D U C T I O N Unpacking the Projector Image ResolutionIntroduction CompatibilityT r o d u c t i o n Usage Guidelines If You Need Assistance WarrantySetting UP Projector Setting UP the Projector T t i n g O j e c t o r Connecting a Computer T t i n g O j e c t o r Audio Adapter Composite video cable Audio cable Connecting a Video PlayerCable Powering up the Projector and Adjusting the Image Turning Off the Projector Using Projector Basic Image Adjustment Using the ProjectorUsing the Remote Control I n g O j e c t o r Adjusting the Projector Using the Keypad and Remote Buttons Standby Using the On-Screen Menus Display Menu Audio Menu Image Menu I n g O j e c t o r Position and Vert. Position Controls Menu Rear Projection Language Menu Status Menu I N T E N a N C E Troubleshooting Cleaning the Lens Maintenance & TroubleshootingReplacing the Projection Lamp Pull the lamp door up and remove it Lift and grasp the pull tab and lift the module out Figure Using the Kensington Lock Replacing the Batteries in the Remote ControlProblem Image isn’t centered on the screen Troubleshooting Problem Nothing on projection screenProblem Color or text not being projected Problem The screen resolution is not rightProblem Image is too wide or narrow for screen Problem Image is noisy or streaked Problem Image is out of focusProblem Image and menus are reversed left to right Problem no soundProblem Lamp shuts off Problem Lamp seems to be getting dimmerP E N D I Appendix SpecificationsStandard Accessories Ship with the projector Part Number AccessoriesOptional Accessories Key command to Computer Activate port De-activate port Portable and Laptop Activation ChartFN-F6 FN-F4 FN-F1 NCR Wyse Software driven Zenith FN-F10 Using Video Mirroring with a PowerBook Computer Feet Projected Image SizeD E Index D e Page Page Limited Warranty Part Number