SETTING UP THE PROJECTOR
1Place the projector on a flat surface.
•The projector must be within 10 feet of your power source and within 10 feet of your computer.
•If you want to project from behind a translucent screen, set up the projector behind your screen. See “Rear Projection” on page 40 to reverse the image.
•If you are installing the projector on the ceiling, refer to the LitePro 200 Series Ceiling Mount Installation Guide for more information. To turn the image upside down, see “Ceiling” on page 39. The Ceiling Mount Kit is sold separately; see page 58.
2Position the projector the desired distance from the screen.
•The distance from the lens of the projector to the screen determines the size of the projected image. Figure 2 shows three projected image sizes using the varifocal lens or the zoom lens at minimum focusing distance. For more infor- mation about image size, see “Projected Image Size” on page 64.
3Make sure the projector and your computer are turned off.
NOTE: An optional extension cable, sold separately, lets you increase the distance between the projector and your computer to 50 feet. See “Accessories” on
page 57.
25 ft.
4 ft. | 10 ft. |
|
FIGURE 2
Projected image size (varifocal lens, zoom lens at minimum focusing distance)
5