M a i n t e n a n c e
CAUTION: Be sure to fully retract the zoom lens before you put the lens cap on and pack the projector in its case.
FIGURE 35
Removing the lens
To replace a lens:
1Make sure the latch is pointing down.
2Squeeze the latch and gently push the lens in until it stops, then turn the lens clockwise until the catch is engaged.
Using the Zoom Lens
The zoom lens enlarges the projected image by 40% without moving the projector. (For more information about image size, see “Projected Image Size” on page 64.) Follow the previous instructions to install the zoom lens.
Follow these steps when operating the zoom lens:
1Turn the zoom ring (Figure 36) until the projected image is the size you want, even if it is out of focus.
2Turn the focus ring as needed to clear up the image.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
focus ring |
|
|
| zoom ring | ||||||||||
FIGURE 36
LitePro 200 Series zoom lens
42