InFocus 220, 210 manual Adjusting the height of the projector

To raise the projector:

1Raise the front of the projector off the table by lifting up on the handle (Figure 25).

2While holding the projector, press and hold the quick-release button (Figure 25).

3When the projector is the height you want, release the button to lock the elevator foot into position.

4If necessary, use the leveling knob (Figure 24) to adjust the angle of the projected image.

FIGURE 25

Adjusting the height of the projector

To lower the projector:

1Hold the projector’s handle.

2Press the elevator’s quick release button.

3Lower the projector.

4If necessary, use the leveling knob (Figure 24) to readjust the angle of the projected image.

CAUTION: Always hold the pro-

jector’s handle when you press the

elevator’s quick release button.

27