
U s i n g | t h e | P r o j e c t o r |
|
|
|
Rear Projection
When you select Rear Projection, the projector reverses the image so you can project from behind a translucent screen.
•Click either mouse button to reverse the image.
Monitor Connect
When Auto is selected, the projector attempts to pick the correct monitor connection based on the input signal it receives. This set- ting produces the best results in most situations. Select “On” or “Off” only if the image is very dim or not projected.
• Select “On” if your monitor is connected directly to the
NOTE: Do not select “Off” if
CableWizard and the images are excessively dim.
your monitor is connected directly
• Select “Off” if your monitor is not connected directly to the
to the CableWizard.
CableWizard and the image is not projected. (Some IBM
ThinkPad computers exhibit this problem, especially the
ThinkPad 760.)
40