Connecting a Video Player
1If your video player uses a round, one-prong composite video connector, you’ll need only the A/V cable that shipped with the projector.
•If your video player uses a round, four-prongS-video con- nector, you’ll need an S-video cable in addition to the A/V cable. The S-video cable is sold separately. (See “Accesso- ries” on page 57.)
2Plug the A/V cable’s yellow connector into the “video-out” port on your video player (Figure 15). This port may be labeled “To Monitor.”
•If you’re using an S-video cable, connect it to the “s-video out” connector on the video player (Figure 16).
3Plug the other yellow connector into the composite connector on the back of the projector.
•If you’re using S-video, plug the other end of the cable into the “s-video” connector on the projector (Figure 16).
audio/video cable
FIGURE 15
Connecting the projector to a video player using the standard A/V cable (with composite video connector)
