Marantz PD5020D manual Setting RGB3 ADJ, Reducing burn-in of the screen, To select

Page 39

Setting RGB3 ADJ.

When the picture input from the RGB3 input terminal is distorted, select the most appropriate setting from among “1”, “2”, and “3”.

Example: Setting “2”

Press the PROCEED button on the remote control to

display MAIN MENU on the screen, then...

1.Use the ▲ and ▼ buttons to select “FUNCTION”, then press the PROCEED button.

The “FUNCTION” screen appears.

2.Use the ▲ and ▼ buttons to select “RGB3 ADJ.”.

F U N C T I O N

OSM		:	ON
OSM ADJ.		:	1
POWER MGT		:	OFF
GRAY LEVEL		:	3
CINEMA MODE		:	ON
		:	1
RGB3 ADJ.

LONG LIFE
RESET
SEL.	ADJ. EXIT RETURN

3.To select “2”...

Use the ◀ and ▶ buttons to select “2”.

The mode switches as follows each time the ◀ or ▶ buton is pressed:

→ 1 ↔ 2 ↔ 3 ←

F U N C T I O N

OSM		:	ON
OSM ADJ.		:	1
POWER MGT		:	OFF
GRAY LEVEL		:	3
CINEMA MODE		:	ON
		:	2
RGB3 ADJ.

LONG LIFE
RESET
SEL.	ADJ. EXIT RETURN

4.Once the setting is completed...

Press the EXIT button to return to the main menu.

To delete the main menu, press the EXIT button once more.

Information

⬛When you adjust the RGB3 ADJ.

The position of the menu display will change. In such a case, be sure to adjust the position.

⬛Restoring the factory default settings

Select “RESET” under the function menu. Note that this also restores other settings to the factory defaults.

Reducing burn-in of the screen

The brightness of the screen, the position of the picture, positive/negative mode and screen wiper are adjusted to reduce burn-in of the screen.

Example: Setting “PLE” to “LOCK”

Press the PROCEED button on the remote control to display the MAIN MENU on the screen, then proceed as follows.

1.Use the ▲ and ▼ buttons to select “FUNCTION”, then press the PROCEED button.

The “FUNCTION” screen appears.

2.Use the ▲ and ▼ buttons to select “LONG LIFE”, then press the PROCEED button.

F U N C T I O N

OSM		:	ON
OSM ADJ.		:	1
POWER MGT		:	OFF
GRAY LEVEL		:	3
CINEMA MODE		:	ON
RGB3 ADJ.		:	1
LONG LIFE
RESET
SEL.		OK			RETURN
	PROCEED			EXIT

The “LONG LIFE” screen appears.

3. Use the ▲ and ▼ buttons to select “PLE”.

L O N G L I F E

PLE	:	AUTO
ORBITER	:	OFF
INVERSE	:	OFF
SCREEN WIPER	:	OFF

SEL.

ADJ.

EXIT

RETURN

4.Use the ◀ and ▶ buttons to select “LOCK”.

The mode switches as follows each time the ◀ or ▶ button is pressed:

AUTO ↔ LOCK

L O N G L I F E

PLE	:	LOCK
ORBITER	:	OFF
INVERSE	:	OFF
SCREEN WIPER	:	OFF

SEL.

ADJ.

EXIT

RETURN

32

Image 39

Contents Model PD5020D User Guide Important Information PrecautionsTo avoid damage and prolong operating life Mises en garde et précautions de sécurité Recommandations importantesPrécautions DOC avis de conformationRemarque Who is covered? What is covered?What is excluded? Before requesting service To get warranty serviceContents Ventilation Requirements for enclosure mounting How to Attach Options to the Plasma MonitorIntroduction to the Plasma Monitor PD5020D Features you’ll enjoy includeContents of the Package IntroductionFront View Part Names and FunctionAudio Rear View/ Terminal BoardRGB/PC Remote Control5MULTI Battery Installation and ReplacementHandling the remote control Operating RangeApprox 7m/ 23ft Personal computer with a digital RGB output InstallationConnections with Equipment that has a Digital Interface Connecting Your Document CameraConnecting Your VCR or Laser Disc Player Connecting Your DVD PlayerRight Left External Speaker ConnectionsPin No Signal Analog Pin Assignments and Signal Levels for 15 pin RGB AnalogBasic Operations To check the remaining time To set the off timerTo cancel the off timer After the power is turned off with the off timerWatching with a wide screen manual When watching videos or digital video discsWhen watching high definition video source Wide OperationsWatching computer images with a wide screen When Picture Size is set to OFF Supported resolution Picture Size settingSide by side Operations in the Side-by-side modeMulti Screen Operations Showing a couple of pictures on the screen at the same timeOperations in the Picture-in-picture mode Selecting the input signals to be displayedAdjusting the OSM controls Menu Operations OSMOn Screen Menu ControlsMain menu Sub menu Functions Adjusting the computer image Picture Settings MenuAdjusting the picture Picture adjustment screenExample Setting the Theater mode To set to Theater Types of picture modes Setting the color temperature Setting the color temperatureExample Setting Once the setting is completedAdjusting the color to the desired quality Example Adjusting the White Balance Adjusting the white balance Types of noise reduction Example Setting NR-3Reducing noise in the picture NR Sound settings menu Sound Settings MenuAdjusting the treble, bass and left/right balance Example Adjusting the bassWhen Auto Picture is OFF Screen Settings MenuAdjusting the Position, Size, Fine Picture, Picture Adj Example Adjusting the vertical position in the normal modeSetting the on-screen menu Function Settings MenuAdjusting the position of the menu display Adjusting the position of the menu displayExample Adjusting the position of the menu display To adjust the positionPower management settings Setting the power management for computer imagesExample Turning the power management function on Power management functionDescription Turning the picture back on POWER/STANDBY indicatorExample Setting the Cinema Mode to OFF Setting the picture to suit the movieSetting the gray level for the sides of the screen Example Adjusting the Gray LevelReducing burn-in of the screen Setting RGB3 ADJWhen you adjust the RGB3 ADJ Example Setting PLE to LockPerform Steps 1-2 on Page 32, then Setting the time for InverseSetting the time for Screen Wiper Setting the timeTo select on for the Working Time To select on for Working Time Resetting to the default valuesExample Setting Audio 1 to Video Options Settings MenuSetting the allocation of the audio connectors Setting the BNC connectorsSee page 55 for the details of the above settings Setting a computer image to the correct RGB select screenExample Setting the RGB Select mode to Motion To set the RGB select mode to MotionExample Setting the on mode to OFF Setting high definition images to the suitable screen sizeSetting the picture size for RGB input signals Example Setting the 1080B mode toInformation Menu Setting the language for the menusExample Setting the menu display to Deutsch Language settingsTo select 3.58 Ntsc Setting the video signal formatExample Setting the color system to 3.58 Ntsc Video signal formatsCommunication Format External ControlApplication ConnectionsInput Switch Change Command Reference ListPower on Power OFFContrast Gain Data Volume Gain DataAudio Mute On Audio Mute OffRED Gain Data Picture Mode SelectColor Gain Data Tint Gain DataBass Gain Data NR Mode SetGreen Gain Data Blue Gain Data22. V. Position Gain Data Screen Mode SelectBalance Gain Data 23. H. Position Gain DataOSM Select Phase Gain DataAuto Picture Select Clock Gain DataGray Level Set Power MGT SelectCinema Mode Set OSM ADJ. Gain DataInverse Set Screen Wiper SetAudio Select Set Language Select RGB SelectHD Select Picture Size SelectMulti Screen Select Color System SelectInput Mode Request Frequency RequestHorizontal sync polarity Video ADJ Request Failure Mode Request Audio Select RequestModel Name Request Table of Signals Supported Supported resolutionComputer input signals supported by this system Page Symptom Checks Remedy TroubleshootingSignals SpecificationsPage Page Austria Is a registered trademark