Marantz PD5020D manual Basic Operations

Page 19

Basic Operations

POWER

To turn the unit ON and OFF:

1.Plug the power cord into an active AC power outlet.

2.Press the POWER ON button (on the remote control) to turn on the unit.

The monitor’s POWER/STANDBY indicator will light up (green) when the unit is on.

3.Press the POWER OFF button (on the remote control or the unit) to turn off the unit.

The monitor’s POWER/STANDBY indicator turns red and the standby mode is set (only when turning off the unit with the remote control).

VOLUME

To adjust the sound volume:

1.Press and hold the VOLUME button (on the remote control or the unit) to increase sound output to the

desired level.

2.Press and hold the VOLUMEbutton (on the remote control or the unit) to decrease sound ountput to the

desired level.

MUTE

To cancel the sound:

Press the MUTE button on the remote control to cancel the sound; press again to restore.

DISPLAY

To check the settings:

1.The screen changes each time the DISPLAY button is pressed.

2.If the button is not pressed for approximately three seconds, the indication will disappear.

DIGITAL ZOOM

Digital zoom specifies the picture position and enlarges the picture.

1.Press the POINTER button to display the pointer. ()

To change the size of the picture:

Press the ZOOM+ button and enlarge the picture.

The pointer will change to resemble a magnifying

glass. ( )

A press of the ZOOM- button will reduce the picture and return it to its original size.

To change the picture position:

Select the position with the ▲▼   buttons.

2.Press the POINTER button to delete the pointer.

AUTO ADJUST

To adjust the size or quality of the picture automatically:

Press the AUTO ADJUST button.

Information

AUTO ADJUST ON setting

When RGB (still picture) input

is selected ...... Fine Picture, Picture ADJ, Position,

and Contrast will be adjusted automatically.

When RGB (motion picture),

VIDEO, or Y/Pb/Pr (component) input

is selected ...... The screen size switches to ZOOM

mode automatically with the superimposed caption displayed fully only when the picture contains dark areas above and below the picture.

12

Image 19
Contents Model PD5020D User Guide Important Information PrecautionsTo avoid damage and prolong operating life Mises en garde et précautions de sécurité Recommandations importantesPrécautions DOC avis de conformationRemarque Who is covered? What is covered?What is excluded? Before requesting service To get warranty serviceContents Ventilation Requirements for enclosure mounting How to Attach Options to the Plasma MonitorIntroduction to the Plasma Monitor PD5020D Features you’ll enjoy includeContents of the Package IntroductionFront View Part Names and FunctionAudio Rear View/ Terminal BoardRGB/PC Remote Control5MULTI Battery Installation and ReplacementOperating Range Handling the remote controlApprox 7m/ 23ft Personal computer with a digital RGB output InstallationConnections with Equipment that has a Digital Interface Connecting Your Document CameraConnecting Your VCR or Laser Disc Player Connecting Your DVD PlayerRight Left External Speaker ConnectionsPin No Signal Analog Pin Assignments and Signal Levels for 15 pin RGB AnalogBasic Operations To check the remaining time To set the off timerTo cancel the off timer After the power is turned off with the off timerWatching with a wide screen manual When watching videos or digital video discsWhen watching high definition video source Wide OperationsWatching computer images with a wide screen When Picture Size is set to OFF Supported resolution  Picture Size settingSide by side Operations in the Side-by-side modeMulti Screen Operations Showing a couple of pictures on the screen at the same timeSelecting the input signals to be displayed Operations in the Picture-in-picture modeAdjusting the OSM controls Menu Operations OSMOn Screen Menu ControlsMain menu Sub menu Functions  Adjusting the computer image Picture Settings MenuAdjusting the picture  Picture adjustment screenTo set to Theater Example Setting the Theater mode Types of picture modes  Setting the color temperature Setting the color temperatureExample Setting Once the setting is completedExample Adjusting the White Balance Adjusting the color to the desired quality Adjusting the white balance  Types of noise reduction Example Setting NR-3Reducing noise in the picture  NR Sound settings menu Sound Settings MenuAdjusting the treble, bass and left/right balance Example Adjusting the bassWhen Auto Picture is OFF Screen Settings MenuAdjusting the Position, Size, Fine Picture, Picture Adj Example Adjusting the vertical position in the normal modeSetting the on-screen menu Function Settings MenuAdjusting the position of the menu display Adjusting the position of the menu displayExample Adjusting the position of the menu display To adjust the positionPower management settings Setting the power management for computer imagesExample Turning the power management function on Power management functionDescription Turning the picture back on POWER/STANDBY indicatorExample Setting the Cinema Mode to OFF Setting the picture to suit the movieSetting the gray level for the sides of the screen Example Adjusting the Gray LevelReducing burn-in of the screen Setting RGB3 ADJWhen you adjust the RGB3 ADJ Example Setting PLE to LockPerform Steps 1-2 on Page 32, then Setting the time for InverseSetting the time Setting the time for Screen WiperTo select on for the Working Time To select on for Working Time Resetting to the default valuesExample Setting Audio 1 to Video Options Settings MenuSetting the allocation of the audio connectors Setting the BNC connectorsSee page 55 for the details of the above settings Setting a computer image to the correct RGB select screenExample Setting the RGB Select mode to Motion To set the RGB select mode to MotionExample Setting the on mode to OFF Setting high definition images to the suitable screen sizeSetting the picture size for RGB input signals Example Setting the 1080B mode toInformation Menu Setting the language for the menusExample Setting the menu display to Deutsch Language settingsTo select 3.58 Ntsc Setting the video signal formatExample Setting the color system to 3.58 Ntsc Video signal formatsCommunication Format External ControlApplication ConnectionsInput Switch Change Command Reference ListPower on Power OFFContrast Gain Data Volume Gain DataAudio Mute On Audio Mute OffRED Gain Data Picture Mode SelectColor Gain Data Tint Gain DataBass Gain Data NR Mode SetGreen Gain Data Blue Gain Data22. V. Position Gain Data Screen Mode SelectBalance Gain Data 23. H. Position Gain DataOSM Select Phase Gain DataAuto Picture Select Clock Gain DataGray Level Set Power MGT SelectCinema Mode Set OSM ADJ. Gain DataScreen Wiper Set Inverse SetAudio Select Set Language Select RGB SelectHD Select Picture Size SelectMulti Screen Select Color System SelectFrequency Request Input Mode RequestHorizontal sync polarity Video ADJ Request Audio Select Request Failure Mode RequestModel Name Request Supported resolution Table of Signals SupportedComputer input signals supported by this system Page Symptom Checks Remedy TroubleshootingSignals SpecificationsPage Page Austria Is a registered trademark