Onkyo CR-L5 Connecting -compatible Components, Hookup Example, Onkyo CD recorder

CR-L5_E.book Page 12 Monday, May 19, 2003 4:05 PM

Connecting -compatible Components

With (Remote Interactive) you can control your - compatible Onkyo cassette tape deck or CD recorder with the CR-L5’s remote controller, and use the following spe-

cial functions:

■Auto Power On

When you turn on a component connected via while the CR-L5 is in Standby, the CR-L5 automatically turns on and selects that component as the input source.

This function doesn’t work if the CR-L5 is already on.

■Direct Change

When you press the play button on a component connected

via , the CR-L5 automatically selects that component as the input source.

■Auto Power Off

When you set the CR-L5 to Standby, all components con-

nected via also enter Standby.

■Controlling Other Components

Other components can be controlled with the supplied remote controller (see “Remote Controller” on page 10).

■CD Synchro Recording

A CD recorder or cassette tape deck connected via , and set to record pause, will start recording automatically when CD playback is started on the CR-L5.

■Timer

The CR-L5’s timers can be used to automatically start play- back or recording on a cassette tape deck or CD recorder

connected via (see “Timers” on page 26).

■Sleep Timer

When you set the CR-L5’s sleep timer, the sleep timers on

components connected via are also set, so all compo- nents switch off after the specified period.

To use , you need to connect the CR-L5’s connector

to an connector on the other component by using an

cable. An cable is supplied with each -compat- ible Onkyo cassette tape deck and CD recorder.

Hookup Example:

Onkyo CD recorder

	REMOTE	DIGITAL IN
		OPTICAL
L	CONTROL
	L

RR

ANALOGANALOG

INPUTOUTPUT

To use		you
must make an
analog RCA/
phono connec-
tion between
the CR-L5 and								cable
the other com-
ponent even if
they are con-
nected digitally.
								AUDIO
								OUTPUT
								DIGITAL
		CDR						COAXIAL
							REMOTE	OPTICAL
							CONTROL
	OUT	IN
SPEAKERS A	SPEAKERS B		ANTENNA					AUDIO
L		L						OUTPUT
					FM 75			DIGITAL
								COAXIALCD RECEIVER
							AM	MODEL NO. CR-L5
		SUB
		WOOFER			TV/LINE	TAPE	CDR
		PREOUT		L			AUDIO
R		R					L ANALOG	OPTICAL
							REMOTE
				R			CONTROL
N. / SPEAKER							R
N. / SPEAKER
					IN	OUT IN	OUT IN

Notes:

•Push the plugs in all the way to make a good connection.

•Use only cables for connections.

• To use you must make an analog RCA/phono con- nection between the CR-L5 and the other component even if they are connected digitally.

• If a component has two connectors, you can connect either one to the CR-L5. The other connector is for con-

necting additional -compatible components.

• Connect the CR-L5’s connector to only Onkyo com- ponents. Connecting to other manufacturer’s components may cause them to malfunction.

• Some Onkyo -compatible components may not sup- port the special functions described above.

12