Onkyo instruction manual Press the Standby button to set the CR-L5 to Standby mode

Page 27

CR-L5_E.book Page 27 Monday, May 19, 2003 4:05 PM

Timers—Continued

If you select AM or FM, use the Up/Down []/[ ] buttons to select a preset, and then press [ENTER].

In this example, preset #2 has been selected.

4 Use the Up/Down []/[ ] buttons to select Once or Every, and then press [ENTER].

Once: For one-off use.

Every: For weekly use.

6 Use the number buttons to enter the ON time, and then press [ENTER].

To enter, for example, 7:29, press [10/0], [7], [2], and [9].

Use the [>10] button to toggle between AM and PM for the 12-hour format.

After the ON time has been set, the OFF time is auto- matically set to one hour later.

7 Use the number buttons to enter the OFF time, and then press [ENTER].

OR

5 Use the Up/Down []/[ ] buttons to select one of the following options, and then press [ENTER].

SUN (Sunday)

FRI (Friday)

MON (Monday)

SAT (Saturday)

TUE (Tuesday)

Everyday

WED (Wednesday)

Days Set

THU (Thursday)

 

The “Everyday” and “Days Set” (specifies a range of days) options only appear if you select “Every” in step 4.

If you select “Days Set”, use the Up/Down []/[ ] buttons to select the first day, and then press [ENTER].

In this example, the first day is Tuesday.

Use the Up/Down []/[ ] buttons to select the last day, and then press [ENTER].

In this example, the last day is Sunday.

The TIMER indicator appears, as shown.

In this example, timers #1 and #3 have been set.

8 Press the [STANDBY] button to set the CR-L5 to Standby mode.

Notes:

•You can cancel the timer setting procedure at any time by pressing the [TIMER] button.

•If you’re using a timer to start playback, be sure to set the volume to a suitable level. If the VOLUME control is set to minimum, you won’t hear anything when the timed playback task starts.

•If you set the playback source to CD, don’t forget to load a CD into the CR-L5 before setting it to Standby mode.

•If you’re using a timer to start recording on an Onkyo cas-

sette tape deck connected via , be sure to select the correct input source on the cassette tape deck, and load a cassette tape before switching the CR-L5 to Standby mode.

•For timed recording, it’s a good idea to set the start time a little before the actual start time of the program that you intend to record.

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents CR-L5 Important Safeguards Damage Requiring Service-Unplug the appliance Important SafeguardsAC Fuse PowerInstalling This Unit Recording CopyrightFeatures PrecautionsMemory backup AM loop antenna FM indoor antenna Supplied AccessoriesDisc Notes About playing copy-controlled CDsOpen the battery compartment, as shown Before Using the CR-L5Installing the Remote Controller Batteries Using the Remote ControllerControls & Connectors Front PanelDisplay Rear Panel Remote Controller Cassette Tape Deck CD recorder Connecting Your Other Components to the CR-L5Connecting -compatible Components Hookup ExampleOnkyo CD recorder Speakers Set B Connecting Your SpeakersStrip 15 mm 5/8 Speakers Set aAttach the FM antenna, as shown Connecting AntennaConnecting the AM Loop Antenna Connecting the Indoor FM AntennaAM loop antenna Connecting an Outdoor FM AntennaConnecting an Outdoor AM Antenna Connecting AntennaTurning Off Accuclock Powering Up and Setting the ClockPowering Up the CR-L5 First Time SetupDisplaying the Time in Standby Mode Setting Accuclock to Use a Specific StationDisplaying the Day & Time Press the Enter button to set the clock Setting the Clock ManuallyUse the Up/Down / buttons to select a day Use the Up/Down / buttons to set the timeSelecting Sound Sources Using the CR-L5Adjusting the Volume Using HeadphonesPlaying CDs To Stop Memory Playback To Cancel Memory PlaybackRepeat Playback Random PlaybackTuning the Radio Using the RadioPresetting FM Stations Presetting Stations ManuallySelect the preset that you want to delete Selecting PresetsDeleting Presets Tons to select a presetDisplaying a Preset Station’s Frequency Naming Presets Editing Preset NamesOther Functions Adjusting the Bass & TrebleAdjusting the Display Brightness Using Direct ModeSetting the Timers TimersAbout the Timers Timer ExamplesPress the Standby button to set the CR-L5 to Standby mode Use the Up/Down / buttons to select Timer Off Turning Timers OffChecking Timer Settings Using the Sleep TimerTroubleshooting Troubleshooting Abnormal Behavior Restoring the Default SettingsOnkyo Europe Electronics GmbH Specifications
Top Page Image Contents