Onkyo CR-L5 Selecting Presets, Deleting Presets, RDS Radio Data System, Tons to select a preset

CR-L5_E.book Page 23 Monday, May 19, 2003 4:05 PM

Using the Radio—Continued

Selecting Presets

You can select previously stored presets as follows.

1 Use the INPUT []/[ ] buttons, or the

	remote controller’s INPUT [ ]/[		] but-
	tons to select AM or FM.
2
	Use the PRESET [ ]/[ ] buttons, or
	the remote controller’s [	]/[	] but-
	tons to select a preset.

Deleting Presets

You can delete unwanted presets as follows.

1 Select the preset that you want to delete.

See the previous section for information on selecting presets.

In this example, preset #3 has been selected.

RDS (Radio Data System)

The Radio Data System (RDS) allows FM radio stations to broadcast various information to RDS-compatible radios, including the name of the radio station and information about the program being broadcast. Many FM stations in most European countries transmit RDS information.

The CR-L5 supports the following RDS information: PS: Program Service Name

When tuned into a station that transmits PS information, the station’s name appears on the display.

RT: Radio Text

When tuned into a station that transmits RT information, any text messages received appear on the display.

When the CR-L5 is tuned into a station that’s transmitting RDS information, the RDS indicator appears on the display. To display the PS and RT information, press the [DISPLAY] button repeatedly to select Frequency display, PS, or RT, as shown.

Frequency

PS (Program Service Name)

RT (Radio Text)

2 While holding down the [MEMORY] button, press the [FM MODE] button.

The selected preset is deleted and its number disap- pears from the display.

When the CR-L5 receives RT information, “Waiting” appears on the display first, and then the received text scrolls across the display.

23