Onkyo Powering Up and Setting the Clock, Powering Up the CR-L5, Turning Off Accuclock

CR-L5_E.book Page 16 Monday, May 19, 2003 4:05 PM

Powering Up and Setting the Clock

STANDBY/ON

STANDBY / ON
STANDBY		PAUSE	STOP	PLAY
PHONES			INPUT	DIRECT
SPEAKERS A / B MEMORY FM MODE		DISPLAY
CLEAR	TUNING	PRESET

ON STANDBY

ON STANDBY

TONE

▼ ▲ INPUT

TIMER

1 2 3

4 5 6 ▲

7 8 9 ▼

TIMER

STANDBY indicator DISPLAY

Powering Up the CR-L5

Before connecting the power cord, complete all connections (see page 11 to 15).

1 Connect the power cord to a suitable wall outlet.

The CR-L5 enters Standby mode, and the STANDBY indicator comes on.

2 To turn on the CR-L5, press the [STANDBY/ON] button or the remote controller’s [ON] button.

The CR-L5 comes on, the display lights up, and the STANDBY indicator goes off.

To turn off the CR-L5, press the [STANDBY/ON] but- ton or the remote controller’s [STANDBY] button. The CR-L5 enters Standby mode and the STANDBY indi- cator comes on.

>10	10/0	ENTER	ENTER
SLEEP	VOLUME
		UP

CLOCKCALL MUTING

CLOCK CALL DOWN	DIRECT
DIMMER	DISPLAY	DISPLAY
CD	PLAY MODE
CDR	CLEAR
TAPE	REPEAT

Turning Off ACCUCLOCK

If you don’t want ACCUCLOCK to automatically update the clock at 2 A.M., 3 A.M. and 2 P.M. everyday, you can turn it off as follows.

1 Press the [TIMER] button repeatedly until “Clock” appears on the display, as shown.

First Time Setup

The very first time you turn on the CR-L5, the ACCU- CLOCK function automatically sets the clock by using the CT (Clock Time) information present in RDS radio broad- casts.

While the clock is being set, “Wait” flashes on the display, as shown. It may take up to five minutes to set the clock.

When the clock has been set, the message “Clock Adjusted” scrolls across the display, then the day and time are dis- played for a while, as shown.

If the clock has not been set correctly, see “Displaying the Day & Time” on page 17.

The ACCUCLOCK function automatically updates the clock daily at 2 A.M., 3 A.M. and 2 P.M..

2 Press the [ENTER] button.

“AccuClock” appears on the display, as shown.

These asterisks appear when the ACCUCLOCK function is on

If “Manual Adj.” appears, use the Up/Down []/[ ] buttons to select “AccuClock”.

3 To turn off ACCUCLOCK, press the [DISPLAY] button.

The asterisks disappear, indicating that the ACCU- CLOCK function is off.

To turn the ACCUCLOCK function on again, press the [DISPLAY] button so that asterisks appear.

16