twinax connection
Twinax Connection
Before installing the printer into the twinax environment, you should run the
After the
Active jobs/devices
If there are any active devices on the twinax line that the printer is going to be on:
1 Terminate the device immediately up cable of the printer, on the twinax line.
2 Place on Hold any devices down cable of the printer with active jobs.
3 SIGN OFF any active terminals and terminal type devices down cable of the printer.
note
"UP CABLE" describes any device that is physically located closer to the Host System on the twinax line. "DOWN CABLE" describes a device physically located more distant from the Host System on the twinax line. For example, if this printer is the third device on the line, the immediate "UP CABLE" device would be the second device on this line.
29 |