9 Verify that the
10 Put the MPI in coax or twinax code dump mode and print the job in hexadecimal format. Use this printout to verify data from the host.
11 With the MPI not in code dump mode, set the printer configuration to Hex Print Mode and print the job. Use the printout to verify the hexadecimal output of the MPI going to the printer.
12 With no host cable attached, the LEDs will light briefly (about 1 second) when the MPI has completed initialization. If the LEDs do not do this, the MPI's power connection may be faulty.
| 53 |