Step2 – JES2 Definition (SYS1.PARMLIB)
RMT1 LUTYPE3,BUFSIZE=3840,LINE=1,NUMRD=0,NUMPR=1,NOCOMP,
NOCMPCT,SETUPHDR,CONSOLE
R1.PR1 CLASS=A,NOSEP,PRWIDTH=132,NOFCBLOD,WS=(W,R,Q,PMD,LIM, F,T/C,P),CKTPAGE=30
DESTID NAME=LOC64XX,DEST=R1
Step 3 – Define to CICS or another application program
Refer to the vendor documentation for defining a DSE printer to the program for its use. Host system commands to change printer setting are not supported in DSE mode.
Step 4 – Printer Settings
In LU3 mode the printer settings control the CPI, LPI and all other aspects of the printed output. Therefore, you must set the printer settings to match the characteristics of the job you are printing. Host controls are not supported in this mode, except for the coax Command Interpreter commands on page 19.
64 |