Step2 – JES2 Definition (SYS1.PARMLIB)
RMT1 LUTYPE0,BUFSIZE=3840,LINE=1,NUMRD=0,NUMPR=1,NOCOMP,
NOCMPCT,SETUPHDR,CONSOLE
R1.PR1 CLASS=A,NOSEP,PRWIDTH=132,NOFCBLOD,WS=(W,R,Q,PMD,LIM, F,T/C,P),CKPTAGE=30
DESTID NAME=LOC64XX,DEST=R1
Step 3 – Define to CICS or another application program
Host commands for changing printer settings are not supported in this mode. Refer to the vendor documentation for defining an DSC printer to the program for its use.
Step 4 – Printer Settings
In LU0 mode the printer settings control the CPI, LPI and all other aspects of the printed output. Therefore, you must set the printer settings to match the characteristics of the job you are printing. Host controls are not supported in this mode, except for the coax Command Interpreter commands on page 19.
68 |