6.Replace the cover. See “Replacing the cover and connecting the cables” on page 26 (small desktop model), “Replacing the cover and connecting the cables” on page 38 (desktop model), or “Replacing the cover and connecting the cables” on page 52 (microtower model).
7.Reconnect the power cords for the computer and monitor to electrical outlets.
8.Insert the POST/BIOS update (flash) diskette into drive A, and turn on the computer and the monitor.
9.After the update session is completed, there will be no video and the series of beeps will end. Remove the diskette from the diskette drive, and turn off the computer and monitor.
10.Unplug the power cords from electrical outlets.
11.Remove the cover. See “Removing the cover” on page 17 (small desktop model), “Removing the cover” on page 29 (desktop model), or “Removing the cover” on page 41 (microtower model).
12.Remove any adapters that impede access to the BIOS Configuration jumper.
13.Replace the Clear CMOS/Recovery jumper to its original position.
14.Replace any adapters that were removed.
15.Replace the cover and reconnect any cables that were disconnected.
16.Turn on the computer to restart the operating system.