Gateway FHD2400H manual Power

Using Your Gateway Flat-Panel Monitor

4Plug the speaker bar’s power and audio plugs into the appropriate connectors underneath the monitor.

Power	Audio jack
connector

5Plug the speaker bar’s pink and green 3.5 audio plugs into the appropriate speaker and microphone connectors on the computer.

Important

For best audio performance, if your video connection uses HDMI, the digital audio is also conveyed along the same cable, and no additional audio connection is required. You may need to set your video source’s audio mode to PCM or ANALOG to hear the audio. See your source device’s user guide for more information.

For information on using the speaker bar, see “Using the speaker bar” on page 18.

To remove the speaker bar:

1Disconnect all audio and power cables from the speaker bar.

2Press the two clips on the back of your monitor, then slide the speaker bar back.

Mounting clip

6