Speaker bar does not work

www.gateway.com

I installed the speaker bar, but no sound is coming out of the speakers.

•Make sure that the speaker bar power cord is plugged into the power connector on the back of your monitor, and that the monitor is plugged into an AC power outlet.

•Make sure that the speaker bar’s headphone plug (green) is plugged into the headphone jack on your computer.

•If you are using HDMI audio, you must set your device to output audio in PCM mode. See the user guide that came with your device for more information.

•If you just finished installing and connecting the speaker bar, restart your monitor so that it can recognize the new speaker bar.

•Make sure that the volume is turned up.

•Make sure that headphones are not plugged into the headphone jacks on the sides of the speaker bar. When headphones are connected, no sound comes out of the speaker bar’s speakers.

•Your headphone/speaker jack may have been muted using Windows sound controls. To check your headphone/speaker mute settings, click the speaker icon in the Windows taskbar,

or click (Start), Control Panel, Sounds and Audio Devices, the Volume tab, then click Advanced. For optimum volume control using the speaker bar, we recommend that you set the Windows volume mid-way between the lowest and highest setting.

•Make sure that the audio input and video input match. Touch (Menu), (Audio), then (Audio Switching) to match the inputs.

I want to plug in my headphones, but there is a headphone jack on both sides of the speaker bar. Which should I use?

•You can use either jack or both jacks at the same time. When headphones are connected, no sound comes out of the speaker bar’s speakers.

I do not get sound from my headphones.

•Make sure that your speaker bar is connected to an audio source by unplugging your headphones and adjusting the speaker bar volume.

•After you make sure that your speaker bar can play sounds, make sure that your headphones are plugged into one of the headphone jacks on the sides of the speaker bar, and not into the microphone jack.

The sound coming from the speakers sounds distorted.

•Turn down the volume until the distortion disappears.

•Check the audio output volume of the sound device the speaker bar is connected to. If the audio device’s output volume is set too high, the speaker bar’s sound may always be distorted. To adjust the audio device’s output volume, see the device’s user guide. To adjust

the volume in Windows, click the speaker icon in the Windows taskbar, or click (Start), Control Panel, Sounds and Audio Devices, the Volume tab, then click Advanced. For optimum volume control using the speaker bar, we recommend that you set the Windows volume mid-way between the lowest and highest setting.

I plugged my microphone into the speaker bar’s microphone jack, but my computer cannot record any sound.

•Make sure that the speaker bar’s microphone plug (pink) is connected to the microphone jack on your computer.

•Your microphone jack may have been muted using Windows sound controls. To check your

microphone’s mute settings, click the speaker icon in the Windows taskbar, or click (Start), Control Panel, Sounds and Audio Devices, the Volume tab, then click Advanced.