JVC DT-V17G1 specifications Settings of E.AUDIO Group, Audio Setting

Page 14

Menu Configuration—MAIN MENU (cont.)

For the operation procedure, see page 7.

Adjustment bar

Displayed when selecting

Operation guide“BALANCE.” Shows the buttons for each

operation.

•The menu automatically disappears in about 30 seconds after the previous operation.

•Some items may not appear on the menu depending on the input or the input signal.

•The items controlled by the MAKE system do not appear on the menu.

NOTE

Settings of “E.AUDIO GROUP”

The setting values and selectable audio channels of EMBEDDED AUDIO signals are as follows.

(G means GROUP)

1G: channel(s) 1/2/3/4/1+2/3+4/1 – 4 (1G)

2G: channel(s) 5/6/7/8/5+6/7+8/5 – 8 (2G)

1-2G:channel(s) 1/2/3/4/5/6/7/8/1+2/3+4/5+6/7+8/1 – 4 (1G)/5 – 8 (2G)/1 – 8 (1G+2G)

3G: channel(s) 9/10/11/12/9+10/11+12/9 – 12 (3G)

1-3G:channel(s) 1/2/3/4/5/6/7/8/9/10/11/12/1+2/3+4/5+6/7+8/9+10/11+12/1 – 4 (1G)/5 – 8 (2G)/ 9 – 12 (3G)/1 – 8 (1G+2G)/1 – 12 (1-3G)

Example of the level meter display—Level meter position and audio channels

Ex.: When “LEVEL METER ch” is set to “LINE” and “BAR TYPE” is set to “3COLORS”

OVER LEVEL REFERENCE LEVEL

Red

Yellow

Green

•The level meter with no audio signal input is displayed in white for “3COLORS”, and in gray for “W.100.”

•You can select the position of the level meter display—top or bottom of the screen. (☞ “POSITION” in “INFORMATION” on page 18)

•When “PEAK HOLD” is set to “ON,” the maximum level meter value will remain displayed for a set period of time. (At the time the signal input level reaches the highest value.)

14

AUDIO SETTING

Settings for the audio output balance, EMBEDDED AUDIO signals and level meter

Item

To do

Setting value

BALANCE

Adjust the balance between the right and left speakers.

L5 – L1, 0, R1 – R5

E.AUDIO GROUP*1

Select the audio channel group of the EMBEDDED AUDIO

☞ “NOTE”

 

 

signals.

 

LEVEL METER

Adjust the level meter display for the EMBEDDED AUDIO

☞ “NOTE”

SETTING*1

signals.

 

 

LEVEL METER ch

Select how the audio channels are displayed on the level

OFF, LINE (Displays

 

 

meter.

the channels 1 – 6 at

 

 

 

the left of the screen

 

 

 

and 7 – 12 at the right.),

 

 

 

DIVIDE (Displays the odd

 

 

 

channels at the left of

 

 

 

the screen and the even

 

 

 

channels at the right.)

 

BAR TYPE

Select the color of the level meter display.

3COLORS (3 colors to

 

 

 

indicate variations in input

 

 

 

levels), W.100 (white)

 

REFERENCE

Select the standard input level indicated on the level meter.

–20dB, –18dB

 

LEVEL

 

 

 

OVER LEVEL

Select the input level’s lower limit indicated in red for the

–10dB, –8dB, –6dB,

 

 

“3COLORS” display.

–4dB, –2dB

 

BAR

Select the brightness of the level meter.

LOW, HIGH

 

BRIGHTNESS

 

 

 

PEAK HOLD

Activates/deactivates the peak hold function of the level

OFF, ON

 

 

meter.

 

*1 Memorized for each input.

Page 13 Page 15
Image 14
Page 13 Page 15
Contents DT-V17G1 How to replace the fuse Safety PrecautionsPower Connection These openings must not be blocked or coveredEMC Supplement Dear CustomerInformation for Users on Disposal of Old Equipment FCC NoticeTo detach the stand InstallationTo install the stand Screw holes for stand attachment Stand body MonitorLower position To adjust the stand heightTo prevent an accidental fall Fixing the monitorDual Link SDI Daily Operations / ConnectionsFront panel Press buttons to select an item, then press button Press or button when a menu is not displayedDisplay the menu Press Menu buttonRear panel Attaching the power cord holder When a DVI-D signal protected with Hdcp is input Video signalsOn the signal format When no video signal comesStatus indication of Dual Link Status indication of Dual LINK/3G SDI signal informationStatus indication of 3G SDI signal information GNDMenu Configuration-MAIN Menu Picture FunctionSetting of Area MARKER, Safety MARKER, R-AREA Marker MARKER*1*2Settings of E.AUDIO Group Audio SettingExample of the wave form monitor Scope SETTING*1Example of the vector scope Sync FunctionPicture SUB ADJ Settings of sub menu PosiFunction Setting SIZE/POSI. ADJ White Balance SETSetting of Character SET InformationAll reset ENGLISH19About the external control Using the MAKE/TRIGGER systemExternal Control DVI Tally SELSDI ComponentUsing the serial communication ENGLISH23 Basic command listFunctions Data Troubleshooting Maintenance Self-check programLCD panel SpecificationsGeneral Input/output terminalsRear view Front viewSide view ENGLISH27

DT-V17G1 specifications

The JVC DT-V17G1 is a high-performance 17-inch LCD monitor specifically designed for broadcast and production environments. With its advanced features and cutting-edge technologies, it offers an exceptional viewing experience, making it an excellent choice for professionals in the filmmaking and broadcasting industry.

One of the standout features of the DT-V17G1 is its Full HD resolution of 1920 x 1080 pixels, ensuring that images are rendered with stunning clarity and detail. This level of resolution makes it ideal for critical monitoring tasks, allowing professionals to see every nuance in their footage. The monitor also boasts a high brightness level of 300 cd/m², which combined with a contrast ratio of 1000:1, provides excellent visibility even in brightly lit environments.

The DT-V17G1 employs advanced color processing technologies, including 10-bit color depth, which results in a wider color gamut and smoother gradations. This is particularly important for color-critical applications where accurate color representation is essential. The monitor supports various color spaces, including BT.709, making it versatile for different production standards.

In terms of connectivity, the JVC DT-V17G1 is equipped with multiple input options, including HDMI, SDI, and Composite inputs. This versatility ensures it can easily integrate into a wide range of production setups, whether for live broadcasts, video editing, or post-production environments. The monitor also features loop-through capabilities for SDI, allowing for easy signal distribution to other devices.

Another remarkable characteristic of the DT-V17G1 is its comprehensive set of built-in tools designed to assist in video production. These include waveform and vector scope displays, which provide valuable information about the signal's quality and help maintain broadcast standards. Furthermore, the monitor comes with peaking, false color, and zebra patterns, which enhance focus and exposure control.

The JVC DT-V17G1 is housed in a robust and lightweight chassis, making it suitable for both studio and field use. Its ergonomic design includes VESA mount compatibility, offering flexible mounting options to suit different production environments. This combination of advanced features, professional-grade technology, and user-friendly design makes the JVC DT-V17G1 a reliable and indispensable tool for any broadcast or production professional. With its high-quality display and range of monitoring capabilities, it is poised to meet the demands of today’s media industry.
Top Page Image Contents