JVC DT-V17G1 specifications Display the menu, Press buttons to select an item, then press button

Page 7

Menu Operations

1 Display the menu.

To display the MAIN MENU

\Press MENU button.

To display the SET-UP MENU

\Press button while holding button.

MAIN MENU

Selected item

Operation guide

SET-UP MENU

Selected item

Operation guide

2 Press buttons to select an item, then press button.

•For some items, adjustments will be made by

pressing .

Ex.: When “MARKER” in the

MAIN MENU is selected

3 Press buttons to select an item,

then press buttons to make adjustments.

4 Press MENU button to finish the menu operation.

•Pressing MENU button repeatedly deactivates the display of the menu.

Audio Channel Selection

Select audio channels emitted from the speakers (L/R) and the AUDIO (MONITOR OUT) (OUT1(L)/ OUT2(R)) terminals, when EMBEDDED AUDIO signals come in to the E. AUDIO HD/SD SDI terminal (IN1 or IN2) and SDI input (1 or 2) is selected.

•You have to choose a group of selectable audio channels before the channel selection. (☞ “E.AUDIO GROUP” in “AUDIO SETTING” on page 14)

•When a DUAL LINK SDI signal is input, it is assigned to SDI 1.

•The setting is memorized for each input (SDI 1 and SDI 2).

1 Press or button when a menu is not displayed.

The screen for audio channel selection is displayed.

•The screen for audio channel selection automatically disappears in about 30 seconds after the previous operation.

Audio channel selection screen

Selected item

2 Press buttons to select the left (L ch) or right (R ch).

3 Press buttons to select an audio channel.

•Each time you press the button, the audio channel changes according to the settings of “E.AUDIO GROUP.” (☞ “NOTE” on page 14)

4 Press MENU button.

The screen for audio channel selection disappears.

Using the audio level meter

You can check the conditions of the current EMBEDDED AUDIO signals in the audio level meter. (☞ “On the Information Display” on the right,“LEVEL METER SETTING” in “AUDIO SETTING” on page 14)

On the Information Display

The monitor displays the information below.

•Make the setting to display/hide each information using the MENU with the exception of 5, controlled with T.C. button (☞ r on page 6).

•Select the position of the information display.

(☞ “POSITION” in “INFORMATION” on page 18)

1Audio level meter

•Not displayed when “LEVEL METER ch” is set to “OFF.” (☞ “AUDIO SETTING” on page 14)

2Signal format

•Displayed when “STATUS DISPLAY” is set to “ON.” (☞ “INFORMATION” on page 18)

•For the contents displayed, see “Available signals” and “On the signal format” on page 10.

3Source name assigned in “CHARACTER SET.”

•Displayed when “SOURCE ID” is set to “ON” or “AUTO.”

•Displayed in large letters when “STATUS DISPLAY” is set to “OFF” or “AUTO.”

☞“INFORMATION” on page 18

4 CRC error indication

• Displayed when “CRC ERROR” is set to “ON.” (☞ “INFORMATION” on page 18)

• A red square is displayed when an error occurs.

5 Time code

• When the input signal includes no time code, “TC – –:– –:– –:– –” is displayed (☞ r on page 6).

On the Status Display

If you press the INPUT SELECT button (☞ t on page 6) currently lit, the status of the input signal and setting of muting are displayed for about 3 seconds.

•Make the setting to display/hide the status in “STATUS DISPLAY” of the “INFORMATION” (☞ page 18).

•When “STATUS DISPLAY” is set to “AUTO” or “ON,” the status below is also displayed in the following cases:

–When you change the input

–When the signal condition of the current input changes

–When you turn on the monitor

•When “STATUS DISPLAY” is set to “ON,” the signal format will remain displayed 3 seconds after the status is displayed.

1Signal format

•For the contents displayed, see “Available signals” and “On the signal format” on page 10.

2Signal format of DVI input

☞“DVI INPUT SEL.” on page 19

Status indication of DUAL LINK/3G SDI signal information

☞“NOTE” on page 11

3Detailed information of 3G SDI signal input

•Displays the sampling structure/pixel resolution of the signal format.

•Displayed when the 3G SDI signal is input.

4 Setting of “MUTING”

•Displayed only when muting is activated (☞ 4 on page 6).

ENGLISH7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents DT-V17G1 These openings must not be blocked or covered Safety PrecautionsPower Connection How to replace the fuseFCC Notice Dear CustomerInformation for Users on Disposal of Old Equipment EMC SupplementScrew holes for stand attachment Stand body Monitor InstallationTo install the stand To detach the standFixing the monitor To adjust the stand heightTo prevent an accidental fall Lower positionFront panel Daily Operations / ConnectionsDual Link SDI Press Menu button Press or button when a menu is not displayedDisplay the menu Press buttons to select an item, then press buttonRear panel Attaching the power cord holder When no video signal comes Video signalsOn the signal format When a DVI-D signal protected with Hdcp is inputGND Status indication of Dual LINK/3G SDI signal informationStatus indication of 3G SDI signal information Status indication of Dual LinkPicture Function Menu Configuration-MAIN MenuMARKER*1*2 Setting of Area MARKER, Safety MARKER, R-AREA MarkerAudio Setting Settings of E.AUDIO GroupSync Function Scope SETTING*1Example of the vector scope Example of the wave form monitorFunction Setting Settings of sub menu PosiPicture SUB ADJ White Balance SET SIZE/POSI. ADJInformation Setting of Character SETENGLISH19 All resetExternal Control Using the MAKE/TRIGGER systemAbout the external control Component Tally SELSDI DVIUsing the serial communication Functions Data Basic command listENGLISH23 Troubleshooting Self-check program MaintenanceInput/output terminals SpecificationsGeneral LCD panelENGLISH27 Front viewSide view Rear view

DT-V17G1 specifications

The JVC DT-V17G1 is a high-performance 17-inch LCD monitor specifically designed for broadcast and production environments. With its advanced features and cutting-edge technologies, it offers an exceptional viewing experience, making it an excellent choice for professionals in the filmmaking and broadcasting industry.

One of the standout features of the DT-V17G1 is its Full HD resolution of 1920 x 1080 pixels, ensuring that images are rendered with stunning clarity and detail. This level of resolution makes it ideal for critical monitoring tasks, allowing professionals to see every nuance in their footage. The monitor also boasts a high brightness level of 300 cd/m², which combined with a contrast ratio of 1000:1, provides excellent visibility even in brightly lit environments.

The DT-V17G1 employs advanced color processing technologies, including 10-bit color depth, which results in a wider color gamut and smoother gradations. This is particularly important for color-critical applications where accurate color representation is essential. The monitor supports various color spaces, including BT.709, making it versatile for different production standards.

In terms of connectivity, the JVC DT-V17G1 is equipped with multiple input options, including HDMI, SDI, and Composite inputs. This versatility ensures it can easily integrate into a wide range of production setups, whether for live broadcasts, video editing, or post-production environments. The monitor also features loop-through capabilities for SDI, allowing for easy signal distribution to other devices.

Another remarkable characteristic of the DT-V17G1 is its comprehensive set of built-in tools designed to assist in video production. These include waveform and vector scope displays, which provide valuable information about the signal's quality and help maintain broadcast standards. Furthermore, the monitor comes with peaking, false color, and zebra patterns, which enhance focus and exposure control.

The JVC DT-V17G1 is housed in a robust and lightweight chassis, making it suitable for both studio and field use. Its ergonomic design includes VESA mount compatibility, offering flexible mounting options to suit different production environments. This combination of advanced features, professional-grade technology, and user-friendly design makes the JVC DT-V17G1 a reliable and indispensable tool for any broadcast or production professional. With its high-quality display and range of monitoring capabilities, it is poised to meet the demands of today’s media industry.
Top Page Image Contents