JVC DT-V17G1 specifications Rear panel

Page 8

Daily Operations / Connections (cont.)

7Rear panel

Carry handle

Use this handle when carrying the monitor.

e

1REMOTE terminal

Terminal for controlling the monitor by an external control. (☞ “External Control” on page 20)

2VIDEO terminals (BNC)

Input (IN) and output (OUT) terminals for the composite video signals.

3COMPO. (Y, PB/B-Y, PR/R-Y) terminals (BNC) Input (IN) and output (OUT) terminals for the analog component video (color difference) signals.

4AUDIO (IN) terminals (pin jack)

Input terminals for the analog audio signals.

•Use this terminal for the analog audio connection of the SDI. When a superimposed signal (EMBEDDED AUDIO signal on an SDI signal) is input, analog audio signals cannot be input.

5AUDIO (MONITOR OUT) terminals (pin jack) Output terminals for the analog audio signal.

•The terminals emit the audio signals through the AUDIO (IN) terminal or EMBEDDED AUDIO signals through the E. AUDIO HD/SD SDI (IN 1 or IN 2) input terminal.

•The signal is output from this terminal only when the monitor is on or in “P.SAVE” (power

rsave) mode. (☞ “NO SYNC ACTION” in “SYNC FUNCTION” on page 15)

•The EMBEDDED AUDIO signal...

–is decoded into an analog signal, then emitted.

–is emitted only when “SDI 1” or “SDI 2” is selected, and when EMBEDDED AUDIO signals come in to the E. AUDIO HD/SD SDI (IN 1 or IN 2) terminal.

8

6E. AUDIO HD/SD SDI (IN 1, IN 2) terminals (BNC) Input terminals for the HD/SD SDI signals.

•The terminals accept also EMBEDDED AUDIO signals including up to 12 audio channels with a sampling frequency of 48 kHz.

•Use both terminals when selecting DUAL LINK SDI for the input.

7E. AUDIO HD/SD SDI (SWITCHED OUT) terminal (BNC)

Output terminal for the HD/SD SDI signals.

•The SDI signals of the current input (SDI 1 or SDI 2) are re-clocked, then emitted.

•When an input other than SDI 1 and SDI 2 is selected, the SDI signal of the input selected last time is emitted from this terminal.

•The signals are emitted from this terminal only when the monitor is on or in “P.SAVE” (power save) mode.

•No signals are emitted when DUAL LINK SDI is selected for the input.

8DVI-D (HDCP) terminal

Input terminal for the DVI-D signal compatible with HDCP.

•When the picture is not displayed correctly, change the setting of “DVI INPUT SEL.” (☞ page 19).

9DC switch

Turns the DC 12 V power on or off.

•You need to press button (☞ u on page

6) on the front panel to turn on the monitor after turning on the DC switch.

•The monitor consumes the battery even while the monitor is on standby. To save battery life, turn off the DC switch.

CAUTION

Do not connect the power cord until all other connections are completed.

Page 7 Page 9
Image 8
Page 7 Page 9
Contents DT-V17G1 Safety Precautions Power ConnectionHow to replace the fuse These openings must not be blocked or coveredDear Customer Information for Users on Disposal of Old EquipmentEMC Supplement FCC NoticeInstallation To install the standTo detach the stand Screw holes for stand attachment Stand body MonitorTo adjust the stand height To prevent an accidental fallLower position Fixing the monitorDual Link SDI Daily Operations / ConnectionsFront panel Press or button when a menu is not displayed Display the menuPress buttons to select an item, then press button Press Menu buttonRear panel Attaching the power cord holder Video signals On the signal formatWhen a DVI-D signal protected with Hdcp is input When no video signal comesStatus indication of Dual LINK/3G SDI signal information Status indication of 3G SDI signal informationStatus indication of Dual Link GNDMenu Configuration-MAIN Menu Picture FunctionSetting of Area MARKER, Safety MARKER, R-AREA Marker MARKER*1*2Settings of E.AUDIO Group Audio SettingScope SETTING*1 Example of the vector scopeExample of the wave form monitor Sync FunctionPicture SUB ADJ Settings of sub menu PosiFunction Setting SIZE/POSI. ADJ White Balance SETSetting of Character SET InformationAll reset ENGLISH19About the external control Using the MAKE/TRIGGER systemExternal Control Tally SEL SDIDVI ComponentUsing the serial communication ENGLISH23 Basic command listFunctions Data Troubleshooting Maintenance Self-check programSpecifications GeneralLCD panel Input/output terminalsFront view Side viewRear view ENGLISH27

DT-V17G1 specifications

The JVC DT-V17G1 is a high-performance 17-inch LCD monitor specifically designed for broadcast and production environments. With its advanced features and cutting-edge technologies, it offers an exceptional viewing experience, making it an excellent choice for professionals in the filmmaking and broadcasting industry.

One of the standout features of the DT-V17G1 is its Full HD resolution of 1920 x 1080 pixels, ensuring that images are rendered with stunning clarity and detail. This level of resolution makes it ideal for critical monitoring tasks, allowing professionals to see every nuance in their footage. The monitor also boasts a high brightness level of 300 cd/m², which combined with a contrast ratio of 1000:1, provides excellent visibility even in brightly lit environments.

The DT-V17G1 employs advanced color processing technologies, including 10-bit color depth, which results in a wider color gamut and smoother gradations. This is particularly important for color-critical applications where accurate color representation is essential. The monitor supports various color spaces, including BT.709, making it versatile for different production standards.

In terms of connectivity, the JVC DT-V17G1 is equipped with multiple input options, including HDMI, SDI, and Composite inputs. This versatility ensures it can easily integrate into a wide range of production setups, whether for live broadcasts, video editing, or post-production environments. The monitor also features loop-through capabilities for SDI, allowing for easy signal distribution to other devices.

Another remarkable characteristic of the DT-V17G1 is its comprehensive set of built-in tools designed to assist in video production. These include waveform and vector scope displays, which provide valuable information about the signal's quality and help maintain broadcast standards. Furthermore, the monitor comes with peaking, false color, and zebra patterns, which enhance focus and exposure control.

The JVC DT-V17G1 is housed in a robust and lightweight chassis, making it suitable for both studio and field use. Its ergonomic design includes VESA mount compatibility, offering flexible mounting options to suit different production environments. This combination of advanced features, professional-grade technology, and user-friendly design makes the JVC DT-V17G1 a reliable and indispensable tool for any broadcast or production professional. With its high-quality display and range of monitoring capabilities, it is poised to meet the demands of today’s media industry.
Top Page Image Contents