JVC DT-V17G1 Tally SEL, Sdi, Dvi, Component, 3G-B.DS, Marker, Frame, Mark.Sel, Aspect, Status

Page 21

<Functions controlled by the MAKE/TRIGGER system>

Display

Functions to be controlled

Opening

 

Short-circuiting

TALLY SEL

Selects the color of the tally lamp.

Green

 

Red

SDI 1

Changes the input to “SDI 1.”

Invalid

 

Valid

SDI 2

Changes the input to “SDI 2.”

Invalid

 

Valid

DVI

Changes the input to “DVI.”

Invalid

 

Valid

COMPONENT

Changes the input to “COMPO.”

Invalid

 

Valid

VIDEO

Changes the input to “VIDEO.”

Invalid

 

Valid

3G-B.DS

Selects the “3G SDI LEVEL B” data stream.

DS 1

 

DS 2

DUAL LINK

Turns on or off “SDI DUAL LINK.”

Off

 

On

A.MARKER

The area marker indication

Off

 

On

S.MARKER

The safety marker indication

Off

 

On

FRAME

Indication of the area of the specified aspect ratio

Off

 

On

C.MARKER

The center marker indication

Off

 

On

MARK.SEL

Selects the items of “MARKER”*3

Non-“R-” items

 

“R-” items

ASPECT

Changes the aspect ratio.

4:3

 

16:9

1:1

Displays in 1:1 mode.

Off

 

On

STATUS

Status display*4

“On the Status Display” on page 7

L.METER

Audio level meter display

 

*5

TIME CODE

Time code display

Off

 

On

SOURCE ID

“SOURCE ID” in “INFORMATION” on page 18

 

*6

WAVE FORM

Wave form monitor display

 

*7

VECTOR

Vector scope display

 

*7

COLOR OFF

Color off

Color

 

Monochrome

SCR CHECK

Screens check

 

*8

I/P MODE

Change a mode according to a input picture.

 

*9

MUTING

Muting on/off

Off

 

On

DIMMER

Change the intensity of the button lamps.

NORMAL

 

DARK

– – –

No function

 

*3 Selects which functions in “MARKER” are activated, non-“R-” items or “R-” items. (“MARKER” on page 13) *4 Displays the information shown when INPUT SELECT button of the current input is pressed (“On the Status

Display” on page 7). While controlling with the MAKE system, the information is displayed only at the moment of short-circuiting.

*5 While controlling with the MAKE system, the level meter is switched between displayed (short-circuiting) and hidden (opening). When “LEVEL METER ch” is set to “OFF,” the level meter is not displayed (“NO EFFECT” appears).

While controlling with the TRIGGER system, the pattern of the audio channel display is switched.

*6 While controlling with the MAKE system, the available set-up options will be the setting value currently selected in “SOURCE ID” (“ON” or “AUTO” [short-circuiting]) and “OFF” (opening). While controlling with the TRIGGER system, uses the same set-up option as those in the SET-UP MENU. (“SOURCE ID” in “INFORMATION” on page 18)

*7 While controlling with the MAKE system, the wave form monitor and vector scope is switched between displayed (short-circuting) and hidden (opening) regardless of the “AUTO OFF” setting in the MAIN MANU. While controlling with the TRIGGER system, the screen is switched in the same way as when pressing the SCOPE button (e on page 6). If the wave form monitor and vector scope are input at the same time, the wave form monitor is displayed.

*8 While controlling with the MAKE system, the screen is switched between normal screen (opening) and blue screen (short-circuiting). While controlling with the TRIGGER system, the screen changes in the same way as when pressing SCREENS CHECK button (q on page 6).

*9 Must be controlled with the TRIGGER system. The mode changes in the order of “NORMAL” \ “CINEMA” \ “FIELD.” (This function cannot be controlled with the MAKE system.)

You cannot assign the same function to different pin terminals.

The TRIGGER system switches each function by short-circuiting the pin terminal for about 1 second and opening it.

ENGLISH21

Image 21
Contents DT-V17G1 Power Connection Safety PrecautionsHow to replace the fuse These openings must not be blocked or coveredInformation for Users on Disposal of Old Equipment Dear CustomerEMC Supplement FCC NoticeTo install the stand InstallationTo detach the stand Screw holes for stand attachment Stand body MonitorTo prevent an accidental fall To adjust the stand heightLower position Fixing the monitorDaily Operations / Connections Front panelDual Link SDI Display the menu Press or button when a menu is not displayedPress buttons to select an item, then press button Press Menu buttonRear panel Attaching the power cord holder On the signal format Video signalsWhen a DVI-D signal protected with Hdcp is input When no video signal comesStatus indication of 3G SDI signal information Status indication of Dual LINK/3G SDI signal informationStatus indication of Dual Link GNDPicture Function Menu Configuration-MAIN MenuMARKER*1*2 Setting of Area MARKER, Safety MARKER, R-AREA MarkerAudio Setting Settings of E.AUDIO GroupExample of the vector scope Scope SETTING*1Example of the wave form monitor Sync FunctionSettings of sub menu Posi Function SettingPicture SUB ADJ White Balance SET SIZE/POSI. ADJInformation Setting of Character SETENGLISH19 All resetUsing the MAKE/TRIGGER system External ControlAbout the external control SDI Tally SELDVI ComponentUsing the serial communication Basic command list Functions DataENGLISH23 Troubleshooting Self-check program MaintenanceGeneral SpecificationsLCD panel Input/output terminalsSide view Front viewRear view ENGLISH27

DT-V17G1 specifications

The JVC DT-V17G1 is a high-performance 17-inch LCD monitor specifically designed for broadcast and production environments. With its advanced features and cutting-edge technologies, it offers an exceptional viewing experience, making it an excellent choice for professionals in the filmmaking and broadcasting industry.

One of the standout features of the DT-V17G1 is its Full HD resolution of 1920 x 1080 pixels, ensuring that images are rendered with stunning clarity and detail. This level of resolution makes it ideal for critical monitoring tasks, allowing professionals to see every nuance in their footage. The monitor also boasts a high brightness level of 300 cd/m², which combined with a contrast ratio of 1000:1, provides excellent visibility even in brightly lit environments.

The DT-V17G1 employs advanced color processing technologies, including 10-bit color depth, which results in a wider color gamut and smoother gradations. This is particularly important for color-critical applications where accurate color representation is essential. The monitor supports various color spaces, including BT.709, making it versatile for different production standards.

In terms of connectivity, the JVC DT-V17G1 is equipped with multiple input options, including HDMI, SDI, and Composite inputs. This versatility ensures it can easily integrate into a wide range of production setups, whether for live broadcasts, video editing, or post-production environments. The monitor also features loop-through capabilities for SDI, allowing for easy signal distribution to other devices.

Another remarkable characteristic of the DT-V17G1 is its comprehensive set of built-in tools designed to assist in video production. These include waveform and vector scope displays, which provide valuable information about the signal's quality and help maintain broadcast standards. Furthermore, the monitor comes with peaking, false color, and zebra patterns, which enhance focus and exposure control.

The JVC DT-V17G1 is housed in a robust and lightweight chassis, making it suitable for both studio and field use. Its ergonomic design includes VESA mount compatibility, offering flexible mounting options to suit different production environments. This combination of advanced features, professional-grade technology, and user-friendly design makes the JVC DT-V17G1 a reliable and indispensable tool for any broadcast or production professional. With its high-quality display and range of monitoring capabilities, it is poised to meet the demands of today’s media industry.