JVC DT-V17G1 specifications Attaching the power cord holder

Page 9

pDC IN 12V terminal

DC 12 V (maximum DC 17 V) power input connector.

e Screw holes for external battery attachment

Attach external battery for DC 12 V power supply

by using 2 screw holes. Choose the appropriate

screw holes from 1, 2 or 3 according to the type of

external battery.

Attaching the power cord holder

The provided power cord holder prevents accidental disconnection of the AC power cord from the AC IN terminal.

• The power cord holder consists of two parts, a case and a cover.

When using DC 12 V power (maximum DC 17 V), check the DC IN 12V terminal pin signal, and use the correct polarity. If the polarity is reversed, this could cause a fire or personal injury.

While using both the AC and DC 12 V power supply, AC power supply is preferentially used. If the AC power supply is cut off (for example, when turning off the POWER switch), the power supply automatically switches to the DC 12 V power supply.

• Use the Anton Bauer Dionic 90 (mount: QR DXC-

M3A) external battery.

CAUTION

Do not use the external battery for DC 24 V

 

power supply.

Use only the battery specified above. If a heavy

 

battery is used, it may fall off depending on the

 

way the monitor is used.

When an external battery is attached, attach the

 

ferrite core (provided) to the power cord from the

 

mount as illustrated below.

1

2

3

 

AC IN

Cover

 

 

 

terminal

 

Case

CAUTION

To detach the cover

qAC IN terminal

AC power input connector.

Connect the provided AC power cord to an AC outlet.

Attach the provided power cord holder to prevent accidental disconnection of the AC power cord. (“Attaching the power cord holder” on page 9)

wPOWER switch

Turns AC power on or off.

You need to press button (u on page 6) to use the monitor after turning on the POWER switch.

Ex.: When the Anton Bauer mount (QR DXC-M3A)

is used

Ferrite core

rSecurity slot

Attach a security wire to this slot.

Note for connections

Before making any connections, turn off all the equipment.

Use a cord whose plugs correctly match the terminals on this monitor and the equipment.

Plugs should be firmly inserted; poor connections could cause noise.

When unplugging a cord, be sure to grasp its plug and pull it out.

DO NOT connect the power cord until all connections are complete.

Refer also to the user manual of each piece of equipment.

Use only the provided screws.

Make sure the plug will not be pulled out after the cover is attached to the case.

ENGLISH9

Image 9
Contents DT-V17G1 Power Connection Safety PrecautionsHow to replace the fuse These openings must not be blocked or coveredInformation for Users on Disposal of Old Equipment Dear CustomerEMC Supplement FCC NoticeTo install the stand InstallationTo detach the stand Screw holes for stand attachment Stand body MonitorTo prevent an accidental fall To adjust the stand heightLower position Fixing the monitorDaily Operations / Connections Front panelDual Link SDI Display the menu Press or button when a menu is not displayedPress buttons to select an item, then press button Press Menu buttonRear panel Attaching the power cord holder On the signal format Video signalsWhen a DVI-D signal protected with Hdcp is input When no video signal comesStatus indication of 3G SDI signal information Status indication of Dual LINK/3G SDI signal informationStatus indication of Dual Link GNDPicture Function Menu Configuration-MAIN MenuMARKER*1*2 Setting of Area MARKER, Safety MARKER, R-AREA MarkerAudio Setting Settings of E.AUDIO GroupExample of the vector scope Scope SETTING*1Example of the wave form monitor Sync FunctionSettings of sub menu Posi Function SettingPicture SUB ADJ White Balance SET SIZE/POSI. ADJInformation Setting of Character SETENGLISH19 All resetUsing the MAKE/TRIGGER system External ControlAbout the external control SDI Tally SELDVI ComponentUsing the serial communication Basic command list Functions DataENGLISH23 Troubleshooting Self-check program MaintenanceGeneral SpecificationsLCD panel Input/output terminalsSide view Front viewRear view ENGLISH27

DT-V17G1 specifications

The JVC DT-V17G1 is a high-performance 17-inch LCD monitor specifically designed for broadcast and production environments. With its advanced features and cutting-edge technologies, it offers an exceptional viewing experience, making it an excellent choice for professionals in the filmmaking and broadcasting industry.

One of the standout features of the DT-V17G1 is its Full HD resolution of 1920 x 1080 pixels, ensuring that images are rendered with stunning clarity and detail. This level of resolution makes it ideal for critical monitoring tasks, allowing professionals to see every nuance in their footage. The monitor also boasts a high brightness level of 300 cd/m², which combined with a contrast ratio of 1000:1, provides excellent visibility even in brightly lit environments.

The DT-V17G1 employs advanced color processing technologies, including 10-bit color depth, which results in a wider color gamut and smoother gradations. This is particularly important for color-critical applications where accurate color representation is essential. The monitor supports various color spaces, including BT.709, making it versatile for different production standards.

In terms of connectivity, the JVC DT-V17G1 is equipped with multiple input options, including HDMI, SDI, and Composite inputs. This versatility ensures it can easily integrate into a wide range of production setups, whether for live broadcasts, video editing, or post-production environments. The monitor also features loop-through capabilities for SDI, allowing for easy signal distribution to other devices.

Another remarkable characteristic of the DT-V17G1 is its comprehensive set of built-in tools designed to assist in video production. These include waveform and vector scope displays, which provide valuable information about the signal's quality and help maintain broadcast standards. Furthermore, the monitor comes with peaking, false color, and zebra patterns, which enhance focus and exposure control.

The JVC DT-V17G1 is housed in a robust and lightweight chassis, making it suitable for both studio and field use. Its ergonomic design includes VESA mount compatibility, offering flexible mounting options to suit different production environments. This combination of advanced features, professional-grade technology, and user-friendly design makes the JVC DT-V17G1 a reliable and indispensable tool for any broadcast or production professional. With its high-quality display and range of monitoring capabilities, it is poised to meet the demands of today’s media industry.