JVC DT-V17G1 specifications Installation, To detach the stand, To install the stand

Page 4

Installation

CAUTION

Do not rest your arm on the monitor or lean against the monitor.

Do not touch the LCD panel when installing the monitor.

Be sure to install the monitor securely to prevent the monitor from falling over, which may cause damage to the monitor or injury.

You can place the monitor in the following two ways when using it on the supplied stand.

4

To detach the stand

CAUTION

Lay the monitor on a cloth with the LCD panel facing down to prevent the LCD panel from being damaged.

Attachment screws

You can tilt the monitor as follows.

 

Monitor

About 12°

Stand

 

About 8°

 

When the monitor is not tilted (0°), the guidelines align as illustrated below.

Guidelines

You can select the stand height—higher position or lower position. (“To adjust the stand height” on page 5)

CAUTION

Be careful not to pinch your fingers in the gap between the monitor and the stand.

When the stand plate is attached to the lower position of the stand body, you cannot tilt the monitor downward.

When the stand plate is attached to the higher position of the stand body (“To adjust the stand height” on page 5), you can place the monitor as illustrated below.

1Remove the screws on the right side of the stand (see the illustration below), then lift the stand up by about 144°.

About 144°

Screw (silver)

2Attach the removed screws and place the monitor as illustrated below.

To place the monitor as illustrated on the left again, remove the screws on the right side of the stand, return the monitor angle to 0°, then reattach the removed screws.

CAUTION

When lifting up the stand...

lay the monitor on a cloth with the LCD panel facing down to prevent the LCD panel from being damaged.

be careful not to pinch your fingers in the moving parts.

Make sure of lifting the stand up until it stops (about 144°); otherwise the monitor may fall over.

Place the monitor on a mat to avoid scratching the table surface.

Do not lift up the stand when the stand plate is attached to the lower position of the stand body.

When the battery is attached, the stand may not be lifted up depending on the type of the battery.

Screw holes for stand attachment

Stand body

Monitor

To install the stand

When attaching the stand to the monitor, insert the guides of the stand into the guide holes on the monitor to place the stand in the correct position. Then fix the stand firmly with the attachment screws.

Guide holes

Guides

Screw holes for stand attachment

Monitor

Stand plate

Stand body

Image 4
Contents DT-V17G1 Safety Precautions Power ConnectionHow to replace the fuse These openings must not be blocked or coveredDear Customer Information for Users on Disposal of Old EquipmentEMC Supplement FCC NoticeInstallation To install the standTo detach the stand Screw holes for stand attachment Stand body MonitorTo adjust the stand height To prevent an accidental fallLower position Fixing the monitorFront panel Daily Operations / ConnectionsDual Link SDI Press or button when a menu is not displayed Display the menuPress buttons to select an item, then press button Press Menu buttonRear panel Attaching the power cord holder Video signals On the signal formatWhen a DVI-D signal protected with Hdcp is input When no video signal comesStatus indication of Dual LINK/3G SDI signal information Status indication of 3G SDI signal informationStatus indication of Dual Link GNDMenu Configuration-MAIN Menu Picture FunctionSetting of Area MARKER, Safety MARKER, R-AREA Marker MARKER*1*2Settings of E.AUDIO Group Audio SettingScope SETTING*1 Example of the vector scopeExample of the wave form monitor Sync FunctionFunction Setting Settings of sub menu PosiPicture SUB ADJ SIZE/POSI. ADJ White Balance SETSetting of Character SET InformationAll reset ENGLISH19External Control Using the MAKE/TRIGGER systemAbout the external control Tally SEL SDIDVI ComponentUsing the serial communication Functions Data Basic command listENGLISH23 Troubleshooting Maintenance Self-check programSpecifications GeneralLCD panel Input/output terminalsFront view Side viewRear view ENGLISH27

DT-V17G1 specifications

The JVC DT-V17G1 is a high-performance 17-inch LCD monitor specifically designed for broadcast and production environments. With its advanced features and cutting-edge technologies, it offers an exceptional viewing experience, making it an excellent choice for professionals in the filmmaking and broadcasting industry.

One of the standout features of the DT-V17G1 is its Full HD resolution of 1920 x 1080 pixels, ensuring that images are rendered with stunning clarity and detail. This level of resolution makes it ideal for critical monitoring tasks, allowing professionals to see every nuance in their footage. The monitor also boasts a high brightness level of 300 cd/m², which combined with a contrast ratio of 1000:1, provides excellent visibility even in brightly lit environments.

The DT-V17G1 employs advanced color processing technologies, including 10-bit color depth, which results in a wider color gamut and smoother gradations. This is particularly important for color-critical applications where accurate color representation is essential. The monitor supports various color spaces, including BT.709, making it versatile for different production standards.

In terms of connectivity, the JVC DT-V17G1 is equipped with multiple input options, including HDMI, SDI, and Composite inputs. This versatility ensures it can easily integrate into a wide range of production setups, whether for live broadcasts, video editing, or post-production environments. The monitor also features loop-through capabilities for SDI, allowing for easy signal distribution to other devices.

Another remarkable characteristic of the DT-V17G1 is its comprehensive set of built-in tools designed to assist in video production. These include waveform and vector scope displays, which provide valuable information about the signal's quality and help maintain broadcast standards. Furthermore, the monitor comes with peaking, false color, and zebra patterns, which enhance focus and exposure control.

The JVC DT-V17G1 is housed in a robust and lightweight chassis, making it suitable for both studio and field use. Its ergonomic design includes VESA mount compatibility, offering flexible mounting options to suit different production environments. This combination of advanced features, professional-grade technology, and user-friendly design makes the JVC DT-V17G1 a reliable and indispensable tool for any broadcast or production professional. With its high-quality display and range of monitoring capabilities, it is poised to meet the demands of today’s media industry.