JVC MP-XP3210GB, MP-XP7210GB warranty Increasing the Optional Memory Capacity

Page 51

EN 51

Increasing the (Optional) Memory Capacity

You can increase the PC memory capacity up to 384M bytes. For the built-in memory capacity, see the Product Specifications on Page 84. You can reduce the application startup time and increase the data process speed by adding an optional memory board.

Consult the JVC PC Technical Support Centre listed at the end of this manual for memory expansion.

Notes

¡Check the memories supported by your PC by accessing: http://www.jvc.co.uk

The memory boards which have been checked for reliable operations are listed on our Web site. Any other memory board may not be recognized by your PC or its operation may be unreliable.

¡The PC inside contains precision components. If you have damaged the memory board by adding a memory, it is not covered by the warranty. Also, if you have damaged your PC, you will be charged for its repair.

¡Take care not to cause excessive static electricity. Do not add a memory board in a place where static electricity may be generated.

¡When you add or replace a memory board, take care not to drop water or other liquids onto your PC or the memory board. Also, take care not to drop screws or other foreign materials that may cause the failure of your PC.

¡Data stored in the PC may be corrupted or damaged in the following cases.

•The battery is used incorrectly.

•The PC is affected by static electricity or electrical noise.

•The battery has discharged.

•The PC is faulty or under repair.

•The PC is dropped or exposed to severe impact.

•The PC is involved in force majeure including lightning or power failure.

Image 51

Contents MP-XP7210GB/MP-XP3210GB It is recommended that you Dear CustomerSome DO’S and DON’TS on the Safe USE of Equipment Important Safety Instructions About Batteries EN5Checking Inventory Transfer of the Software JVC Software License AgreementCopyright Ownership Grant of License RestrictionTermination Limited WarrantyLimitation of Liability TermCopyright Ownership END-USER License AgreementRestricted Rights Legend 10 ENTable of contents Parts and Component Names 12 ENSetting UP 14 EN Unplug the jumper pin before recharging the battery packMounting/Dismounting the Lithium Ion Battery Pack ¡ Mounting Battery Pack ¡ Dismounting Battery PackOpen the display panel Standard recharging time Make sure that the battery pack is fully charged¡ Make sure that the battery pack is fully recharged 16 EN¡ Status indicators Turning On/Off Key OnPress the On/Off key Click Next Initial Setup of Microsoft Windows18 EN Rename your computer and click NextClick Finish Enter the user name and click NextClick Turn Off computer 20 ENTurn-Off Click startJVC Original Software and System Applications 22 EN Setup of JVC Original SoftwareRead the License Agreement when displayed Setup softwareIf The hardware JVC DV Camera Storage message appears DVC’s USB DriversIf The hardware JVC Web Camera message appears 24 ENExplanation of menu options ¡ Enable¡ Disable CC Converter26 EN ¡ Acrobat Reader ¡ Norton AntiVirus ¡ Pixela ImageMixer¡ Real Player 8 Basic To Set Up the Standard Applications Again To Uninstall a Standard Application28 EN Navigate in the Internet World ¡ Contract with the provider Contracting with the Internet Service Provider¡When you have contracted with a provider 30 ENConnection of Telephone Line and Modem Setup Seting up the modem 32 ENInternet Connection Setup Click Connect to the Internet option, and click Next Click Set up my connection manually option, and click NextClick Connect using a dial-up modem option, and click Next 34 ENEnter the phone number, and click Next Click Finish. The setup for connection wizard is complete36 EN Internet Protocol TCP/IP Properties screen will appear Connecting to the Internet 38 ENClick Connect Disconnection from the Internet 40 EN Accessing a WebClick start and click E-mail on the Menu Setting up E-Mail Software42 EN Enter the Account name and Password, and click Next Create 44 ENSending and Receiving E-mails TransmissionCreate a message To check the received messages, click Inbox on the screen 46 ENHardware 48 EN Using the Pointing DeviceDouble-click DragScroll buttons Using Hot keys Using the Numeric Keypad50 EN Increasing the Optional Memory Capacity Adding or Removing a Memory Board 52 ENRemoving the memory board Mounting a memory board54 EN Checking the Additional Memory BoardTotal amount of memory appears on the screen Using the SD Memory Card Slot Remove the dummy cardInsert an SD memory card Using an External Display Unit Connecting an external monitor56 EN Connecting to a network Setting for network connection¡Setting the IP address manually 58 EN ¡Setting a computer name or work group¡Checking the MAC address 60 EN Click the Power Meter tab Checking the battery level62 EN Power-saving modeSystem in halt status System in standby statusUnknown partition on hard disk 64 ENPC Recovery Repeated PC Setup Setting Up Your PC Again Before starting Repeated PC Setup66 EN If you respond with C System Recovery ProcedureSelect the recovery method disk partitioning If you respond with a68 EN Computer Wiederherstellung RecoveryTroubleshooting If the Q&A does not help you PowerPower does not turn on 70 ENStartup and Operation of Windows Screen has hungTerminating an application forcibly 72 EN TroubleshootingPC is turned on but nothing appears on the screen ¡ When the Stand By lamp is flashing¡ When the Stand By lamp is not lit DisplayCannot dial up Using the Internet¡ When a divider is used 74 ENPC dials but connection is not established ¡ The internal modem dials but negotiation is not made Check the following ¡ Check the user name and password76 EN PC cannot send or receive e-mail messagesBattery Battery is not chargedBattery discharge faster than expected PC is hot Forgot the password78 EN MiscellaneousSetting procedure does not complete 80 EN Appendix List of Support Centres 82 ENTrademark notice 84 EN SpecificationMP-VGX1E Options separately available86 EN Page 88 EN Page Victor Company of JAPAN, Limited