JVC MP-XP7210GB, MP-XP3210GB warranty 52 EN, Adding or Removing a Memory Board

Page 52

52 EN

HARDWARE

Adding or Removing a Memory Board

If you have operated your PC, its inside may be hot and you may get a burn. Turn the power switch off and wait for the PC to cool down.

1.Turn the PC Power switch off, and disconnect AC adapter from your PC. Then, remove the standard lithium ion battery pack (if any) and all other peripherals from your PC.

2.Remove the built-in lithium ion battery pack and the memory expansion cover by taking the following steps.

1)Turn your PC upside down, and remove screws 1 to 4.

2)Remove the built-in lithium ion battery pack.

3)Open the memory expansion cover.

1)

2)

Remove the battery

pack by sliding it 3) in this direction.

Cautions

Screw 1 (10 mm) is different in length from screws 2 to 4 (3 mm). Using a wrong screw can damage your PC.

Do not loosen any other screws, otherwise, your PC may fail.

3.Discharge any static electricity from your body by touching something metallic nearby.(Not on the PC)

4.Add or remove a memory board.

Cautions

The MP-XP7210GB PC already has 128M-byte memory in its memory slot. You need to replace it with a 256M-byte memory board to expand the PC memory capacity to the maximum 384M bytes. To do so, remove the 128M-byte memory board from the slot. See Procedure “2) Remove the memory board” on Page 53.

Image 52
Contents MP-XP7210GB/MP-XP3210GB Dear Customer It is recommended that youSome DO’S and DON’TS on the Safe USE of Equipment Important Safety Instructions EN5 About BatteriesChecking Inventory JVC Software License Agreement Copyright Ownership Grant of LicenseRestriction Transfer of the SoftwareLimited Warranty Limitation of LiabilityTerm TerminationEND-USER License Agreement Copyright Ownership10 EN Restricted Rights LegendTable of contents 12 EN Parts and Component NamesSetting UP Unplug the jumper pin before recharging the battery pack Mounting/Dismounting the Lithium Ion Battery Pack¡ Mounting Battery Pack ¡ Dismounting Battery Pack 14 ENOpen the display panel Make sure that the battery pack is fully charged ¡ Make sure that the battery pack is fully recharged16 EN Standard recharging timeTurning On/Off Key On ¡ Status indicatorsPress the On/Off key Initial Setup of Microsoft Windows 18 ENRename your computer and click Next Click NextEnter the user name and click Next Click Finish20 EN Turn-OffClick start Click Turn Off computerJVC Original Software and System Applications Setup of JVC Original Software Read the License Agreement when displayedSetup software 22 ENDVC’s USB Drivers If The hardware JVC DV Camera Storage message appears24 EN If The hardware JVC Web Camera message appears¡ Enable ¡ DisableCC Converter Explanation of menu options26 EN ¡ Pixela ImageMixer ¡ Acrobat Reader ¡ Norton AntiVirus¡ Real Player 8 Basic To Uninstall a Standard Application To Set Up the Standard Applications Again28 EN Navigate in the Internet World Contracting with the Internet Service Provider ¡When you have contracted with a provider30 EN ¡ Contract with the providerConnection of Telephone Line and Modem Setup 32 EN Seting up the modemInternet Connection Setup Click Set up my connection manually option, and click Next Click Connect using a dial-up modem option, and click Next34 EN Click Connect to the Internet option, and click NextClick Finish. The setup for connection wizard is complete Enter the phone number, and click Next36 EN Internet Protocol TCP/IP Properties screen will appear 38 EN Connecting to the InternetClick Connect Disconnection from the Internet Accessing a Web 40 ENSetting up E-Mail Software Click start and click E-mail on the Menu42 EN Enter the Account name and Password, and click Next 44 EN Sending and Receiving E-mailsTransmission CreateCreate a message 46 EN To check the received messages, click Inbox on the screenHardware Using the Pointing Device 48 ENDrag Double-clickScroll buttons Using the Numeric Keypad Using Hot keys50 EN Increasing the Optional Memory Capacity 52 EN Adding or Removing a Memory BoardMounting a memory board Removing the memory boardChecking the Additional Memory Board 54 ENTotal amount of memory appears on the screen Remove the dummy card Using the SD Memory Card SlotInsert an SD memory card Connecting an external monitor Using an External Display Unit56 EN Setting for network connection Connecting to a network¡Setting the IP address manually ¡Setting a computer name or work group 58 EN¡Checking the MAC address 60 EN Checking the battery level Click the Power Meter tabPower-saving mode 62 ENSystem in standby status System in halt status64 EN Unknown partition on hard diskPC Recovery Repeated PC Setup Before starting Repeated PC Setup Setting Up Your PC Again66 EN System Recovery Procedure Select the recovery method disk partitioningIf you respond with a If you respond with CComputer Wiederherstellung Recovery 68 ENTroubleshooting Power Power does not turn on70 EN If the Q&A does not help youScreen has hung Startup and Operation of WindowsTerminating an application forcibly Troubleshooting 72 EN¡ When the Stand By lamp is flashing ¡ When the Stand By lamp is not litDisplay PC is turned on but nothing appears on the screenUsing the Internet ¡ When a divider is used74 EN Cannot dial upPC dials but connection is not established Check the following ¡ Check the user name and password 76 ENPC cannot send or receive e-mail messages ¡ The internal modem dials but negotiation is not madeBattery is not charged BatteryBattery discharge faster than expected Forgot the password 78 ENMiscellaneous PC is hotSetting procedure does not complete 80 EN Appendix 82 EN List of Support CentresTrademark notice Specification 84 ENOptions separately available MP-VGX1E86 EN Page 88 EN Page Victor Company of JAPAN, Limited