JVC MP-XP3210GB, MP-XP7210GB warranty EN5, About Batteries

Page 5

EN5

Lithium-ion is vulnerable in colder temperatures.

About Batteries

DANGER! Do not attempt to take the batteries apart, or expose them to flame or excessive heat, as it may cause a fire or explosion.

WARNING! Do not allow the battery or its terminals to come in contact with metals, as this can result in a short circuit and possibly start a fire.

Caution! Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.

The Benefits Of Lithium-Ion Batteries

Lithium-ion battery packs are small but have a large power capacity. However, when one is exposed to cold temperatures (below 10°C), its usage time becomes shorter and it may cease to function. If this happens, place the battery pack in your pocket or other warm, protected place for a short time, then re-attach it to the Mobile mini note PC. As long as the battery pack itself is not cold, it should not affect performance.

(If you’re using a heating pad, make sure the battery pack does not come in direct contact with it.)

CAUTIONS

General Battery Precautions

Use only the following batteries:

Please make note of the following rules for battery use. When misused, the batteries can leak or explode.

1.When replacing batteries, refer to page ••.

2.Do not use any different size of batteries from those specified.

3.Be sure to install batteries in the correct direction.

4.Do not expose the batteries to excessive heat as they can leak or explode.

5.Do not dispose of the batteries in a fire.

Battery Packs

The supplied battery pack is a lithium-ion battery. Before using the supplied

battery pack or anTerminals optional battery pack, be

sure to read the following cautions:

1.To avoid hazards . . .

.... do not burn.

.... do not short-circuit the terminals. When transporting, make sure the provided battery cap is attached to the battery. If the battery cap is misplaced, carry the battery in a plastic bag.

.... do not modify or disassemble.

.... do not expose the battery to temperatures exceeding

60°C, as this may cause the battery to overheat, explode or catch fire.

.... use only specified chargers.

2.To prevent damage and prolong service life . . .

.... do not subject to unnecessary shock.

.... charge in an environment where temperatures are within the tolerances shown in the chart below. This is a chemical reaction type battery—cooler temperatures impede chemical reaction, while warmer temperatures can prevent complete charging.

.... store in a cool, dry place. Extended exposure to high temperatures will increase natural discharge and shorten service life.

.... fully charge and then fully discharge the battery every 6 months when storing the battery pack over a long period of time.

.... remove from charger or power unit when not in use, as some machines use current even when switched off.

NOTES:

It is normal for the battery pack to be warm after charging, or after use.

Temperature Range Specifications Charging ............. 10°C to 35°C Operation ........... 0°C to 40°C Storage ............... –10°C to 30°C

Recharging time is based on room temperature of 20°C.

The lower the temperature, the longer recharging takes.

Image 5
Contents MP-XP7210GB/MP-XP3210GB It is recommended that you Dear CustomerSome DO’S and DON’TS on the Safe USE of Equipment Important Safety Instructions About Batteries EN5Checking Inventory Copyright Ownership Grant of License JVC Software License AgreementRestriction Transfer of the SoftwareLimitation of Liability Limited WarrantyTerm TerminationCopyright Ownership END-USER License AgreementRestricted Rights Legend 10 ENTable of contents Parts and Component Names 12 ENSetting UP Mounting/Dismounting the Lithium Ion Battery Pack Unplug the jumper pin before recharging the battery pack¡ Mounting Battery Pack ¡ Dismounting Battery Pack 14 ENOpen the display panel ¡ Make sure that the battery pack is fully recharged Make sure that the battery pack is fully charged16 EN Standard recharging timePress the On/Off key ¡ Status indicatorsTurning On/Off Key On 18 EN Initial Setup of Microsoft WindowsRename your computer and click Next Click NextClick Finish Enter the user name and click NextTurn-Off 20 ENClick start Click Turn Off computerJVC Original Software and System Applications Read the License Agreement when displayed Setup of JVC Original SoftwareSetup software 22 ENIf The hardware JVC DV Camera Storage message appears DVC’s USB DriversIf The hardware JVC Web Camera message appears 24 EN¡ Disable ¡ EnableCC Converter Explanation of menu options26 EN ¡ Real Player 8 Basic ¡ Acrobat Reader ¡ Norton AntiVirus¡ Pixela ImageMixer 28 EN To Set Up the Standard Applications AgainTo Uninstall a Standard Application Navigate in the Internet World ¡When you have contracted with a provider Contracting with the Internet Service Provider30 EN ¡ Contract with the providerConnection of Telephone Line and Modem Setup Seting up the modem 32 ENInternet Connection Setup Click Connect using a dial-up modem option, and click Next Click Set up my connection manually option, and click Next34 EN Click Connect to the Internet option, and click NextEnter the phone number, and click Next Click Finish. The setup for connection wizard is complete36 EN Internet Protocol TCP/IP Properties screen will appear Click Connect Connecting to the Internet38 EN Disconnection from the Internet 40 EN Accessing a WebClick start and click E-mail on the Menu Setting up E-Mail Software42 EN Enter the Account name and Password, and click Next Sending and Receiving E-mails 44 ENTransmission CreateCreate a message To check the received messages, click Inbox on the screen 46 ENHardware 48 EN Using the Pointing DeviceScroll buttons Double-clickDrag 50 EN Using Hot keysUsing the Numeric Keypad Increasing the Optional Memory Capacity Adding or Removing a Memory Board 52 ENRemoving the memory board Mounting a memory boardTotal amount of memory appears on the screen 54 ENChecking the Additional Memory Board Insert an SD memory card Using the SD Memory Card SlotRemove the dummy card 56 EN Using an External Display UnitConnecting an external monitor ¡Setting the IP address manually Connecting to a networkSetting for network connection 58 EN ¡Setting a computer name or work group¡Checking the MAC address 60 EN Click the Power Meter tab Checking the battery level62 EN Power-saving modeSystem in halt status System in standby statusUnknown partition on hard disk 64 ENPC Recovery Repeated PC Setup 66 EN Setting Up Your PC AgainBefore starting Repeated PC Setup Select the recovery method disk partitioning System Recovery ProcedureIf you respond with a If you respond with C68 EN Computer Wiederherstellung RecoveryTroubleshooting Power does not turn on Power70 EN If the Q&A does not help youTerminating an application forcibly Startup and Operation of WindowsScreen has hung 72 EN Troubleshooting¡ When the Stand By lamp is not lit ¡ When the Stand By lamp is flashingDisplay PC is turned on but nothing appears on the screen¡ When a divider is used Using the Internet74 EN Cannot dial upPC dials but connection is not established 76 EN Check the following ¡ Check the user name and passwordPC cannot send or receive e-mail messages ¡ The internal modem dials but negotiation is not madeBattery discharge faster than expected BatteryBattery is not charged 78 EN Forgot the passwordMiscellaneous PC is hotSetting procedure does not complete 80 EN Appendix List of Support Centres 82 ENTrademark notice 84 EN SpecificationMP-VGX1E Options separately available86 EN Page 88 EN Page Victor Company of JAPAN, Limited