JVC GV-PT1 manual Install/Remove Ink Sheet Cartridge

Page 10

B of the

10

PREPARATION

Door

Install/Remove Ink Sheet Cartridge

Before printing, you need to install an ink sheet cartridge. Follow these instructions for initial installation and for removal and replacement of a used cartridge.

NOTE:

Make sure the unit power is off before opening the lid.

A

A

1 OPEN PRINTER LID

Slide the knob in the direction of the arrow. •The lid springs up, so apply gentle pressure

as you open it.

2 REMOVE PROTECTIVE CLIP

Press A as indicated by the arrow, then lift and remove the clip.

•Store the clip in a safe place, and re-attach it prior to transporting the unit.

3 TAKE UP SLACK

Using your index finger, turn the roller on the side with the “ ⇒ ” mark in the direction of the arrow.

4 INSTALL CARTRIDGE

Hold B , turn the cartridge until it’s at the proper angle, then slide it in until you hear it click.

B

OR . . .

REMOVE CARTRIDGE

Open the printer lid, grab the cartridge, and slide it out slowly.

5 CLOSE PRINTER LID

Press down on the lid (where PUSH appears) until you hear it click into place.

CAUTION:

The thermal heads on the underside of the lid may become hot. Take care not to touch them when installing or removing the cartridge.

NOTE:

When you’re moving, or prior to transporting the video printer, be sure to remove the ink sheet cartridge and re-attach the protective clip.

Image 10

Contents GV-PT1 Dear Customer It is recommended that youGrounding or Polarization Power SourcesPower Cord Protection OverloadingReplacement Parts Object and Liquid Entry AccessoriesDamage Requiring Service Safety CheckAbout Thermal Heads Ajor Features Same scene Or different scenesContents Power OFF Lamp Power On/OffPower on Lamp Mode Select ButtonPower Cord $ Pause ConnectorVideo Input Connector front Video Output ConnectorInstall/Remove Ink Sheet Cartridge About Print Sheet Sets SET Contents UsesAbout Ink Sheet Cartridges Image Source With Front Connectors Connect To FrontFront Connectors Connect To Front Input Connector Connect To Image Source VideoLanguage Select Select NO. of Scenes Single PrintClose Print Menu Store Desired Scene Print SceneSetting The Print Menu MenuSelect Options Turn on Video PRINTER’S PowerAccess Print Menu Make ChoicesSelect Print Content Multi-Print Same SceneIf you store the wrong image Store Scene for PrintingPrint Stored Scene If you want to print multiple copies of the same imageMulti-Print Different Scenes 2andStore Desired SCENE, Select Position Print ScenesSET Size of Inset Image Inset PrintSET Position of Inset Image If you want to add an inset to a 4-scene print LOCATE/STORE Inset ImagePrint Image To print multiple copies of the same imageStrobe Print SET ParametersStore Desired Scene Store Desired Image Access Mode Select MenuTitle Impose Record TITLE/DRAWINGIf you want to print multiple copies of the same image Select ModePrint Stored Image If you want to change the title or drawingSnapshot Print Store Snapshot Locate Desired ScenePrint Snapshot Performediting Random Assemble Editing IndexConnectprinter Image Source to Print Stored Scenes To exit the Editing Index modeEngagemode Source Edit Start To print multiple copies of the same sceneError Messsages Troubleshooting Clean Heads Remove Problem SheetRE-INSTALL INK Sheet CARTRIDGE, Close LID Printer JamSignal PowerPower consumption ConnectorsGV-PT1