JVC GV-PT1 manual Grounding or Polarization, Power Sources, Overloading, Power Cord Protection

Page 3

IMPORTANT PRODUCT SAFETY INSTRUCTIONS

Electrical energy can perform many useful functions. But improper use can result in potential electrical shock or fire hazards. This product has been engineered and manufactured to assure your personal safety. In order not to defeat the built-in safeguards, observe the following basic rules for its installation, use and servicing.

ATTENTION:

Follow and obey all warnings and instructions marked on your product and its operating instructions. For your safety, please read all the safety and operating instructions before you operate this product and keep this manual for future reference.

INSTALLATION

1. Grounding or Polarization

(A)Your product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature.

If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

(B)Your product may be equipped with a 3-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature.

If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.

2. Power Sources

Operate your product only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. If your product is intended to operate from battery power, or other sources, refer to the operating instructions.

3. Overloading

Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

4. Power Cord Protection

Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

3

5. Ventilation

Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered.

•Do not block the openings by placing the product on a bed, sofa, rug or other similar surface.

•Do not place the product in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

6. Wall or Ceiling Mounting

The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

Page 2 Page 4
Image 3
Page 2 Page 4
Contents GV-PT1 It is recommended that you Dear CustomerOverloading Power SourcesPower Cord Protection Grounding or PolarizationSafety Check AccessoriesDamage Requiring Service Replacement Parts Object and Liquid EntryAbout Thermal Heads Same scene Or different scenes Ajor FeaturesContents Mode Select Button Power On/OffPower on Lamp Power OFF LampVideo Output Connector $ Pause ConnectorVideo Input Connector front Power CordInstall/Remove Ink Sheet Cartridge SET Contents Uses About Print Sheet SetsAbout Ink Sheet Cartridges Connect To Image Source Video Front Connectors Connect To FrontFront Connectors Connect To Front Input Connector Image Source WithLanguage Select Single Print Select NO. of ScenesClose Print Menu Print Scene Store Desired SceneMenu Setting The Print MenuMake Choices Turn on Video PRINTER’S PowerAccess Print Menu Select OptionsMulti-Print Same Scene Select Print ContentIf you want to print multiple copies of the same image Store Scene for PrintingPrint Stored Scene If you store the wrong image2and Multi-Print Different ScenesPrint Scenes Store Desired SCENE, Select PositionInset Print SET Size of Inset ImageSET Position of Inset Image To print multiple copies of the same image LOCATE/STORE Inset ImagePrint Image If you want to add an inset to a 4-scene printSET Parameters Strobe PrintStore Desired Scene Record TITLE/DRAWING Access Mode Select MenuTitle Impose Store Desired ImageIf you want to change the title or drawing Select ModePrint Stored Image If you want to print multiple copies of the same imageSnapshot Print Locate Desired Scene Store SnapshotPrint Snapshot Editing Index Performediting Random AssembleConnectprinter Image Source to To print multiple copies of the same scene To exit the Editing Index modeEngagemode Source Edit Start Print Stored ScenesError Messsages Troubleshooting Printer Jam Remove Problem SheetRE-INSTALL INK Sheet CARTRIDGE, Close LID Clean HeadsConnectors PowerPower consumption SignalGV-PT1
Top Page Image Contents