JVC GV-PT1 manual Store Desired SCENE, Select Position, Print Scenes

Page 21

12

34

1

2

3

4

5

6

7

8

9

10

11

12

 

 

 

 

13

14

15

16

 

 

 

 

21

6 STORE DESIRED SCENE, SELECT POSITION

When the desired scene is located, press MEMORY. The scene appears on screen and is stored in memory.

•The next segment of the total image to be displayed darkens.

Now set the position of the stored image. Press SET +/– to move the shading to a different section of the image.

•Pressing “+” moves from “1” toward “4” (or “16” if you selected “16”), and pressing “–” moves in the reverse direction.

7 STORE AND POSITION ALL SCENES Repeat step 6 for every scene you are going to print (a total of 4 or 16).

8 PRINT SCENES

Insert a print sheet with the print side (the side with no writing on it) UP into the insertion slot until it is pulled in automatically.

•The Print Lamp lights, indicating printing is in progress.

•“NOW PRINTING” appears on screen, on a blue background.

•When the Print Lamp starts blinking, printing is complete. Remove the print from the exit slot. The Print Lamp goes out.

If the stored image is shaky . . .

..... set “PIX STABILIZER” in the Print Menu to “ON”. This should stabilize the image.

If you store the wrong scene . . .

..... press PICTURE SELECT and the stored image appears on screen. Then press SET +/– to cycle

through the images until the incorrect one appears, and press PICTURE SELECT again to return to the source image display. You can now store the image you want in its place.

If you want to switch between the image being input and the stored image . . .

..... press PICTURE SELECT. The connected TV screen switches between the source image and the

stored image.

*During printing, the image being input alternates with “NOW PRINTING” (appears on a blue background).

*During printing, noise or color changing may be visible on the connected TV. This is normal and does not affect printing.

To print multiple copies of the same set of scenes . . .

..... after the first sheet comes out the exit slot, put another in the insertion slot to print as before. Repeat

as many times as desired.

*Do not attempt to insert a print sheet during printing, as this can result in malfunctions.

To print a “live” image using a camcorder as the source . . .

..... in step 5, instead of playing back the source tape, engage the camcorder’s Record mode. If you’re using a JVC camcorder, you can store a scene you want to print by pressing the camcorder’s Start/ Stop button (in place of the GV-PT1’s MEMORY button). Connect the camcorder’s Editing connector

to the PAUSE Connector on the GV-PT1 using the camcorder’s supplied Editing cable (or a commer- cially available φ 3.5 Mini plug cable).

Page 20 Page 22
Image 21
Page 20 Page 22
Contents GV-PT1 It is recommended that you Dear CustomerPower Cord Protection Power SourcesGrounding or Polarization OverloadingDamage Requiring Service AccessoriesReplacement Parts Object and Liquid Entry Safety CheckAbout Thermal Heads Same scene Or different scenes Ajor FeaturesContents Power on Lamp Power On/OffPower OFF Lamp Mode Select ButtonVideo Input Connector front $ Pause ConnectorPower Cord Video Output ConnectorInstall/Remove Ink Sheet Cartridge SET Contents Uses About Print Sheet SetsAbout Ink Sheet Cartridges Front Connectors Connect To Front Input Connector Front Connectors Connect To FrontImage Source With Connect To Image Source VideoLanguage Select Single Print Select NO. of ScenesClose Print Menu Print Scene Store Desired SceneMenu Setting The Print MenuAccess Print Menu Turn on Video PRINTER’S PowerSelect Options Make ChoicesMulti-Print Same Scene Select Print ContentPrint Stored Scene Store Scene for PrintingIf you store the wrong image If you want to print multiple copies of the same image2and Multi-Print Different ScenesPrint Scenes Store Desired SCENE, Select PositionInset Print SET Size of Inset ImageSET Position of Inset Image Print Image LOCATE/STORE Inset ImageIf you want to add an inset to a 4-scene print To print multiple copies of the same imageSET Parameters Strobe PrintStore Desired Scene Title Impose Access Mode Select MenuStore Desired Image Record TITLE/DRAWINGPrint Stored Image Select ModeIf you want to print multiple copies of the same image If you want to change the title or drawingSnapshot Print Locate Desired Scene Store SnapshotPrint Snapshot Editing Index Performediting Random AssembleConnectprinter Image Source to Engagemode Source Edit Start To exit the Editing Index modePrint Stored Scenes To print multiple copies of the same sceneError Messsages Troubleshooting RE-INSTALL INK Sheet CARTRIDGE, Close LID Remove Problem SheetClean Heads Printer JamPower consumption PowerSignal ConnectorsGV-PT1
Top Page Image Contents