JVC GV-PT1 manual Select Mode, Print Stored Image, If you want to change the title or drawing

Page 27
STORE TITLE IMPOSE IMAGE
PUSH ( MODE SELECT )

4

MODE SELECT MENU

 

 

TITLE

 

SNAP SHOT PRINTING

 

EDITING INDEX

 

QUIT

 

TO SELECT PUSH ( SELECT )

 

TO SET

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

27

4 SELECT MODE

Place the pointer next to “TITLE” by pressing SELECT, then press MODE SELECT.

•The Mode Select Menu disappears, and the image with the title or drawing imposed on it appears on screen.

5 SET CONDITION AND COLOR Pressing SELECT reverses the transparent and opaque portions of the title or drawing.

To change the color, press SET +/–. The colors change as follows:

BLACKBLUEREDGREEN

WHITE YELLOW CYANMAGENTA

6 Press MEMORY, and the image is stored. The Title Impose mode is deactivated.

•To impose multiple titles on the same image, repeat steps 2 – 6.

7 PRINT STORED IMAGE

Insert a print sheet with the print side (the side with no writing on it) UP into the print sheet insertion slot until it is pulled in automatically.

•The Print Lamp comes on and printing begins.

•When the Print Lamp starts blinking, printing is complete. Remove the print from the exit slot. The Print Lamp goes out.

If the stored image is shaky . . .

..... set “PIX STABILIZER” at the Print Menu to “ON”.

If you want to switch between the image being input and the stored image . . .

..... press PICTURE SELECT. The input image and the stored image appear on the connected TV alternately.

*During printing, the image being input alternates with “NOW PRINTING” (appears on a blue background).

*During printing, noise or color changing may be visible on the connected TV. This is normal and does not affect printing.

If you want to print multiple copies of the same image . . .

..... after the first sheet comes out the exit slot, put another in the insertion slot to print as before. Repeat

as many times as desired.

* Do not attempt to insert a print sheet during printing, as this can result in malfunctions.

If you want to change the title or drawing . . .

..... before pressing MEMORY in step 6, access the Mode Select Menu by pressing MODE SELECT. Place

the pointer next to “QUIT” by pressing SELECT, then repeat steps 2 through 5.

Once you press MEMORY in step 6, you can’t change only the title or drawing. In this case, repeat the entire procedure from step 1.

To print a “live” image using a camcorder as the source . . .

..... in step 1, instead of playing back the source tape, engage the camcorder’s Record mode. If you’re

using a JVC camcorder, you can store a scene you want to print by pressing the camcorder’s Start/ Stop button (in place of the GV-PT1’s MEMORY button). Connect the camcorder’s Editing connector to the PAUSE Connector on the GV-PT1 using the camcorder’s supplied Editing cable (or a commer- cially available φ 3.5 Mini plug cable).

If you want to print the image being recorded . . .

..... instead of starting source playback in step 1, engage the camcorder’s Record mode. To store the

desired image, press the camcorder’s Start/Stop button. Connect the camcorder’s editing connector to the printer’s PAUSE Connector using the editing cable supplied with the camcorder, or using a commercially available φ 3.5 mini plug (☞ pg. 12).

Page 26 Page 28
Image 27
Page 26 Page 28
Contents GV-PT1 It is recommended that you Dear CustomerOverloading Power SourcesPower Cord Protection Grounding or PolarizationSafety Check AccessoriesDamage Requiring Service Replacement Parts Object and Liquid EntryAbout Thermal Heads Same scene Or different scenes Ajor FeaturesContents Mode Select Button Power On/OffPower on Lamp Power OFF LampVideo Output Connector $ Pause ConnectorVideo Input Connector front Power CordInstall/Remove Ink Sheet Cartridge SET Contents Uses About Print Sheet SetsAbout Ink Sheet Cartridges Connect To Image Source Video Front Connectors Connect To FrontFront Connectors Connect To Front Input Connector Image Source WithLanguage Select Single Print Select NO. of ScenesClose Print Menu Print Scene Store Desired SceneMenu Setting The Print MenuMake Choices Turn on Video PRINTER’S PowerAccess Print Menu Select OptionsMulti-Print Same Scene Select Print ContentIf you want to print multiple copies of the same image Store Scene for PrintingPrint Stored Scene If you store the wrong image2and Multi-Print Different ScenesPrint Scenes Store Desired SCENE, Select PositionInset Print SET Size of Inset ImageSET Position of Inset Image To print multiple copies of the same image LOCATE/STORE Inset ImagePrint Image If you want to add an inset to a 4-scene printSET Parameters Strobe PrintStore Desired Scene Record TITLE/DRAWING Access Mode Select MenuTitle Impose Store Desired ImageIf you want to change the title or drawing Select ModePrint Stored Image If you want to print multiple copies of the same imageSnapshot Print Locate Desired Scene Store SnapshotPrint Snapshot Editing Index Performediting Random AssembleConnectprinter Image Source to To print multiple copies of the same scene To exit the Editing Index modeEngagemode Source Edit Start Print Stored ScenesError Messsages Troubleshooting Printer Jam Remove Problem SheetRE-INSTALL INK Sheet CARTRIDGE, Close LID Clean HeadsConnectors PowerPower consumption SignalGV-PT1
Top Page Image Contents